Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

Hi people, i have a 1998 Corsa Merit 1.0 12v, its an entry level model and it comes with a lack of equipment such as no rev counter, electric windows, central locking and the multi functional display. I can imagine most of these being either hard, expensive or impossible to install into my car but i really want to install a multi functional display (the bit that displays the time/date and temperature). I was wondering whether it is possible to actually have one installed to a basic model such as mine as i was thinking that there might not be the wires etc to make the display work. If it is possible, is it a D.I.Y job or does it have to be taken to a specialist (e.g. vauxhall dealer) because iv already had a quote for my heater control lights to be replaced at £90 .

I think the connector to plug the MFD into should be somewhere tied up behind the dash but not 100%.

And for the temp display to work your going to need to get and install a sensor which goes behind the front bumper.
I'm sure someone else on here can back me up on this.

why dnt you go to your local scrapyard and get it from there jus dismantle all the dash and get everythink you need.

the wiring is definatley there, i had bit of a mission finding mine but found it to be to the left of the steering colom tucked in to another loom

Okay that's good news I may pay a visit to the scrap yard later, how much would they usually charge for one?

when i picked mine up last week i payed £10 for the MFD , naw gearstick gator form a corsa c, a new interior light and a sunvisor with a mirror, so i expect for just a mfd youll pay around a 5er

Sorry to interrupt but....

In Mrs's corsa, she has one of those MFD on top of the dash, with the clock and date in the small display bit. At the moment its not working, well i dont think it is.

If i look at an angle in the sunlight i can see the numbers, date and time still working (slightly out, however still working) but 99% of the time its just black and you cant see anything. Ive tried changing the fuse, ripping out the MFD, fiddling with wires etc but just can't seem to get it working.

Any help is massively appreciated!

your bulbs have probably gone behind the display take it apart again and put some new ones in there. if you wnat thier are LED kits you can buy if you want it different colours.
Do you have lights behind your heater controls the bulbs behind there are usualy the first to go so you might need to do them at the same time

I payed a visit to vauxhalls parts center (part of masterfit), i got a quote for the cost of the MFD unit and the installation of it.. the actual display screen cost £179.99, the casing around it cost £10 and it cost around £80-£90 for them to install it pretty darn expensive

Get one of ebay and fit it yourself. Far cheaper and it's easy.

Take your pic. Doesn't mattre what engine/model it came from there all the same.

http://shop.ebay.co.uk/items/_W0QQ_dmpt ... &_osacat=0

I'll be stripping everything out of my car so I'll be selling mine if you're interested.

il have urs wen u come to swap the bonnets ova if he dont want it

Not sure i'll remove it just yet, not until my other car is back on the road and working THEN i'll be removing almost everything from the Corsa. So I guess i'll be selling carpets and trim and back seats and all kinds! lol

Right i'm inside my car now and I have opened up the center console, problem is I don't know what the connector looks like and where it is (plug and wires) the only wires visible are the ones that connect to my cd player... ??

dannicoll wrote:Get one of ebay and fit it yourself. Far cheaper and it's easy.

Take your pic. Doesn't mattre what engine/model it came from there all the same.

http://shop.ebay.co.uk/items/_W0QQ_dmpt ... &_osacat=0

Thanks for the link dannicoll, I did order a part from eBay and it came today However...
I still cannot find the plug/connection wires for the unit, there are non under the ventilation system. The unit I ordered had an inch worth of a group of coloured wires already plugged into the back?

Any help would be much appreciated ??