Page 1 of 1
bonnet windscreen washers
Posted: Tue Apr 28, 2009 12:02 am
by kie-1200sxi-shed
ow do you remove them ? i cnt seem to get to them as the bonnet support skeleton/or whatever its caled seems to cover them ?
Re: bonnet windscreen washers
Posted: Tue Apr 28, 2009 12:06 am
by MattyB
are they normal one's or led ones?
Re: bonnet windscreen washers
Posted: Tue Apr 28, 2009 12:10 am
by haydn1987
If they are like the one on the boot you should be able to see a notch at the base that you can stick a very small screw driver in this depresses the clip and you can pull them out. use something plastic instead of a screwdriver so you don't accidentaly scratch you paint.
Re: bonnet windscreen washers
Posted: Tue Apr 28, 2009 12:19 am
by kie-1200sxi-shed
they are normal . so do i remove it from the top or beneath ?
Re: bonnet windscreen washers
Posted: Tue Apr 28, 2009 9:05 am
by MattyB
I can't be certain has i changed mine years ago but from underneath you should see a small hole (level with one of the washer jets, and under the other there should be a small oblong cut out. 1st have a look there to see if they have a nut on. If they have use a socket to undo them. From what i remember tho i thought they were push/slide forward/back off one's.