I've got this prob with the car stalling and not starting for 20 - 30 mins.
I've ordered a new the crank sensor and it should arive in the post soon.
I know that their located down the back of the engine near the starter - is that right?
Does anyone know the type of spanner or socket (and size) as someone told me it could be a torx drive and about 10 or 12mm.
Any help would be much appreciated - Cheers.
Crank Sensor replacement
Moderator: Octane2097
-
- CB-Uk User
- Posts: 93
- Joined: Fri Jun 20, 2008 9:54 am
- Location: Middlesex
Re: Crank Sensor replacement
What engine have you got in you car mate as they ca be put in different places on all engines. I have three engines a 1.2, a 1.4 and a 1.6 16v so i could tell you exactly where on all three engines and what sizes you will need to do the job if you want mate.
CJ
CJ
-
- CB-Uk Newbie
- Posts: 6
- Joined: Fri May 08, 2009 4:17 pm
Re: Crank Sensor replacement
Hi CJ,
Sorry for the delay.
The Corsa is quite an old one - It's a 1.4 LS on a 'L' plate.
Cheers
Sorry for the delay.
The Corsa is quite an old one - It's a 1.4 LS on a 'L' plate.
Cheers