Page 1 of 1

1.0 12v engine to 1.6 16v from running car

Posted: Sun May 10, 2009 8:55 pm
by andys15
hi, i posted a few months ago about an on gonig oil leak that is gonig to be costly to fix, and still with this problem and many oils later lol, am come to the point where id need to get another engine, so was thinking of buying a 1.6 sport and transplanting everything over to my existing car, should the 1.6 engine go stright into my 1.0 12v CLUB chassis with normnal mounting points for engine, gearbox, shafts, ecu etc and wiring loom and the like, and also wanting to fit the air-con, elec windows, elec mirrors and rear discs if the sport has them, so would there be any initial problems of doing all of this, bearing in mind ive heard that for most things the option is there for all these to go in as the chassis are basically the same, just different specs for them duifferent models, thanks andy

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Sun May 10, 2009 10:55 pm
by jarjar
in short buddy sell your car for scrap and buy another if thats what your planning. it would be far too much trouble and wouldnt be cheap, you might save your self a few quid doing it your self, but your gonna have a whole world of problems to deal with. i used to work for vaux as a technician and i wouldn't even do it .

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Sun May 10, 2009 11:07 pm
by andys15
hmm, its something to consider, but ive done far too much to my car exterior wise and everything else apart from the mechanical side, plus id only be gaining the power side of things anyways as thats what im after, everything else i can live with, heres a pic of what ive already done..
Image

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Mon May 11, 2009 9:13 am
by green_machine
nice but please lower it pleaaaaaaase

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Mon May 11, 2009 11:42 am
by MattyB
I've been told that the 1.0ltr wiring is completely different so you would have to rewire it all. (eventually i'm going to attempt a 2.0ltr conversion myself on my 1.0ltr, but aint got the space or money at the moment!)

Your car looks good, i wouldn't bother scrapping it.

From what i'm aware of the 1.6 doesn't have rear discs. Don't think any of the corsa's do as standard!

The electric windows and mirrors aren't difficult to fit. I've done these. Themost difficult bit is wiring them properl into the fusebox. (That's if you leave the dash in as you do it!)

I agree the ar would look better if you can afford to lower it! Paint work look good!

Hope this helps.

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Mon May 11, 2009 4:50 pm
by George611
1.6 front discs re slightly bigger and the calipers.. if yu do the change then id say get the disc conversion on the rear..... im planning to do the 1.6 swap on mine in the future (Y) 1.2 8v - 1.6 :D but gota wait a while until i can.. but id defo go for it if yu hve space and time

Re: 1.0 12v engine to 1.6 16v from running car

Posted: Mon May 11, 2009 8:51 pm
by andys15
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image