Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

hey does anyone no the cylinder head torque settings for my corsa engine code is x12xe cheers fully

alrite mate ive jst had a look in the haynes and its a 1.2 16 valve if the code is x 12 xe ..i had a 1.2 16v and mine was on a chaine not a belt...
cylinder head bolts..
nm lbf ft
stage 1.. 25 18
stage 2.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
stage 3.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
stage 4.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
CYLINDER HEAD COVER BOLTS nm lbf ft
8 6

hope that helps ya mate

ronald wrote:alrite mate ive jst had a look in the haynes and its a 1.2 16 valve if the code is x 12 xe ..i had a 1.2 16v and mine was on a chaine not a belt...
cylinder head bolts..
nm lbf ft
stage 1.. 25 18
stage 2.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
stage 3.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
stage 4.. ANGLE-TIGHTEN A FURTHER 60 DEGREES
CYLINDER HEAD COVER BOLTS nm lbf ft
8 6

hope that helps ya mate

Thanks for sharing this accurate settings. As you can see, me and my uncle is been searching all over the net for this kind of setting for the bolts and torque of corsa because my uncle just recently experienced a blown head gasket so that's why he would be replacing it with a new gasket and a cylinder head bolt set to it. This would be really handy for me and my uncle. Thanks for this info.