HELP !

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
sam_sport
CB-Uk Newbie
Posts: 48
Joined: Tue Mar 31, 2009 9:21 pm
Location: selby, north yorkshire

HELP !

Post by sam_sport »

when im driving along i can hear me left hand side wheel/alloy/something rubbing i think its the caliper?
when i got it up on the jack the wheel wold rock slightly but the nuts are on tight :S
helpp please!!!!
ty
aimable455
CB-Uk User
Posts: 50
Joined: Tue Jan 20, 2009 11:52 pm
Location: harlow

Re: HELP !

Post by aimable455 »

it sounds like you need new wheel bearing mate i bet it sounds like a wering sound is it worse when your drivng round a corner

steve :)
-Woody-
CB-Uk Newbie
Posts: 3
Joined: Sat Jul 11, 2009 8:00 pm

Re: HELP !

Post by -Woody- »

Yep I agree :)

Andrew
User avatar
prawny12009
CB-Uk User
Posts: 87
Joined: Tue Jun 16, 2009 1:18 pm

Re: HELP !

Post by prawny12009 »

check that your brake pads are not down to the metal,

Are you getting a scrapping/grinding sound when braking? or as above is it sort of a whine/hum when turning etc?

You really need the wheel off the ground to check for wheel bearing play whilst your there you can chyeck the pad too if you like, you need to grab the wheel at 12 and 6 o'clock and try to rock the wheel, if you try from 3 and 9 o'clock you might pick up steering arm/rack play or lower arm movement instead of wheel bearing movement, thats why you check at 12 and 6 (remember though that you can pick up bottom ball joint play it 12 and 6 too).
sam_sport
CB-Uk Newbie
Posts: 48
Joined: Tue Mar 31, 2009 9:21 pm
Location: selby, north yorkshire

Re: HELP !

Post by sam_sport »

YES i get a rubbing grinding noise, ive noticed that little shards of metal are appearing aswell!
brake pad i pressume?
how would i take it off to check aswell?
and i dont get any real play on my wheel (12-6)

ty!
User avatar
prawny12009
CB-Uk User
Posts: 87
Joined: Tue Jun 16, 2009 1:18 pm

Re: HELP !

Post by prawny12009 »

to check your pads and disc you will find its easier to see if you take the wheek off, the pads should be a minimum of a few mm thick
Post Reply