Page 1 of 1

Corsa B SXI Electric Windows?

Posted: Wed Nov 04, 2009 7:08 pm
by MattySAFC
Has anybody got a corsa b sxi with electric windows?
Mines a W plate but hasnt got electric windows :?

Re: Corsa B SXI Electric Windows?

Posted: Wed Nov 04, 2009 7:11 pm
by matty101
mines the same and it hasnt

Re: Corsa B SXI Electric Windows?

Posted: Wed Nov 04, 2009 7:27 pm
by dave_w
nope, mine hasnt got electric windows either :(

Re: Corsa B SXI Electric Windows?

Posted: Wed Nov 04, 2009 7:54 pm
by kie-1200sxi-shed
npe i aint got them eighter , stop being lazy lol . easy to install if you cann get the whole kit out of a other corsa .

Re: Corsa B SXI Electric Windows?

Posted: Thu Nov 05, 2009 11:28 pm
by MattySAFC
How much you think we're talkin about gettin electric windows in?

And how do i actually do it?

Re: Corsa B SXI Electric Windows?

Posted: Mon Nov 09, 2009 2:39 pm
by MattySAFC
Anyone?

Re: Corsa B SXI Electric Windows?

Posted: Mon Nov 09, 2009 8:09 pm
by dannicoll
I've read somewhere before on here that if the car already has central locking or electric mirrors the wiring should already there behind the door pannel. Some might as well check and confirm this first.

Just thought it say.

Re: Corsa B SXI Electric Windows?

Posted: Mon Nov 09, 2009 10:20 pm
by MattySAFC
Ar right cheers i'll have a look like.
Are door panels easy to take off? Do they take long?

Re: Corsa B SXI Electric Windows?

Posted: Wed Nov 11, 2009 9:24 pm
by beano4390
Hey
dannicoll wrote:I've read somewhere before on here that if the car already has central locking or electric mirrors the wiring should already there behind the door pannel. Some might as well check and confirm this first.
Yea if your car has already got electric windows and central locking it should be a straight forward job you just need the full electric window kit. ie motor, switches and loom. me and mate did it to his so it can be done.. you might need some rivets to attach motor unit back to the door holding pins or wholes (could use screws but they might rattle lose over time so would recomend rivets.. door panels arn't hard to remove few screws and clips... when fitting to mate a lot of swearing went on but we were doing it all from memory of what we had seen from the car we took the motors from...

You will need to program windows when fitted but that is simple.. hold button to make windows go all the way up keep holding you should hear a click then hold all way down keep holding should hear click again.. windows should now work fine

(please someone correct me if i am wrong at any point mistakes do happen)

Think what i have said above is correct.. if you find half way throught you can't do it or just can't be arsed, take car to local auto electricians or a halfords they will do it for a small fee