Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

hi,yesterday i picked my new baby up,2000 w reg corsa envoy,i noticed yesterday that the MFD was black even with lights on so i replaced the 2 led's today and now it works fine.

when the standard radio is off the MFD shows time,date and temp as normal,however when i turn the standard radio on the middle bit (date) goes blank.

i thought this middle bit was supposed to show the radio stations info when the radio is on?

just to let you know i do not have the radio code so as yet i have not removed the radio,but i can get some radio stations to tune in,however they are really bad reception,and i have no idea what station it is.and it is just the standard radio cassette player thats fitted.i do not know if the previous owner fitted a aftermarket radio or not as i bought this car from a dealership.

any help/ideas?

just to let you know i do not have the radio code so as yet i have not removed the radio

if your planning on puttin a new head unit in you wont need it.

when the standard radio is off the MFD shows time,date and temp as normal,however when i turn the standard radio on the middle bit (date) goes blank.

this usually happens when you put a non standard radio in, if u can have a look at the back of thehead unit and see if pin 8 (i think) is connected up properly and wot not.

when people put non standard head units in they remove pin 8 which allows the middle of the MFD lights up as usual but it can also ruin ur radio reception.

ive read about pin 8 been cut/destroyed in order for the date to show constantly with a aftermarket radio but thats not my problem,my problem is the mfd lights up fully when radio is off but the middle bit goes blank when radio is on matey.

yeah like as said thats usually wot happends when u put a new hu in(mine does it) . so....... if the previous owner had put a new hu in and then cut pin 8 so the date appears, then he puts the standard hu back in with out fixing pin 8 that cud be ur problem.

ill have another look tommorow then,where is this pin 8 located? is it on the wiring plug that plugs into the radio?

not sure i never had a standard radio lol

you say standard radio, but is it? if the previous owner removed it and fitted a after market one, then took it out to sell
they may have fitted a diffrent hed unit from another vauxhall, this would be the same as fitting an after market one.
only the standard unit (standard for your modle of corsa) would work in it
as when the radio is on the date part of the MFD is used to display RDS data or CD data from the radio signal you recive so it turns the date off in order to display thiss, ince only the correct stereo will send the RDS data or CD data to the MFD, it stays blank as its effectivly waiting for a signal from your radio telling the MDF display somthing, till you turn it off again and it goes back to the date.

thats exactly whats happening!

the radio is a 300 series but ive read sumwher it should be a 200 series for this model so maybe thats my prob.

cheers mate.