Page 1 of 1
Slammed & Cammed Vinyls
Posted: Thu Jan 21, 2010 8:33 pm
by Galps-TypeR
Slammed & Cammed Vinyl
Various Colours / Fonts Available
Approx 24" wide x 5" high (Size can be altered)
£10 (inc Postage)......
Discount for group buys
Re: Slammed & Cammed Vinyls
Posted: Thu Jan 21, 2010 8:41 pm
by danthemann
dont mean to burst ya bubble..but i got 2 decals this sort of size but thicker font for £5 delivered from my supplier.
Re: Slammed & Cammed Vinyls
Posted: Thu Jan 21, 2010 8:52 pm
by Galps-TypeR
These are all custom made to order, and high quality vinyl!
Your supplier either:
A. has loads cut out already
B. Uses cheap Vinyl
C. Is not making any money
Re: Slammed & Cammed Vinyls
Posted: Thu Jan 21, 2010 9:02 pm
by danthemann
quality is good..it was custom.
well sorry i will correct myself..it should of been £5 for one delivered but he sent 2 to be nice lol.
sorry i dont wana sound like im trying to stop people buying from you..
please evryone buy his products
Re: Slammed & Cammed Vinyls
Posted: Thu Jan 21, 2010 9:08 pm
by Galps-TypeR
lol, it must be a big company then that stock loads of vinyl.
I just do this on the side..! so everything is made to order.
You will know how good it is after a few years. The cheap stuff shrinks and becomes brittle, and wont be able to go through car washes.
Re: Slammed & Cammed Vinyls
Posted: Fri Jan 22, 2010 11:39 am
by rawgrafix
What vinyl are you using to charge £10?
Re: Slammed & Cammed Vinyls
Posted: Fri Jan 22, 2010 2:43 pm
by Galps-TypeR
Your not just paying for the vinyl, anyone can buy that,
Your also paying for:
Design time
Cutt Time
Weeding Time
Font Costs
Plotter/Computer/Equipment Costs
Postage
Paypal Fee's
Application Tape
Power & Electricity Costs
Plus i have to make a profit or whats the point in doing it?
BTW, the standard vinyl i use is Oracal 651 or Aslan C118, Special vinyls are usualyl RtapeEXF
like i said before. I;m not a big company that do this full time. I just do this on the side, therefore I don't buy vinyl is large rolls.
Re: Slammed & Cammed Vinyls
Posted: Sat Jan 23, 2010 7:41 pm
by Octane2097
lol just dont
Re: Slammed & Cammed Vinyls
Posted: Sun Jan 24, 2010 10:33 pm
by Galps-TypeR
NOW ONLY £7.50 POSTED...!
Re: Slammed & Cammed Vinyls
Posted: Mon Jan 25, 2010 12:19 am
by rawgrafix
That's better lol
Re: Slammed & Cammed Vinyls
Posted: Mon Jan 25, 2010 12:43 am
by Galps-TypeR
lol, they would still be at £10, but i've all ready cut a few out...!
How much would you charge, for this then:
2 hours of design time
45 mins of plotting time
2/3 hours of weeding
approx 24" x 12" wide
Normal Gloss Vinyl
Application tape
Postage or Application
Re: Slammed & Cammed Vinyls
Posted: Mon Jan 25, 2010 1:12 am
by rawgrafix
Galps-TypeR wrote:lol, they would still be at £10, but i've all ready cut a few out...!
How much would you charge, for this then:
2 hours of design time
45 mins of plotting time
2/3 hours of weeding
approx 24" x 12" wide
Normal Gloss Vinyl
Application tape
Postage or Application
What the hell is it? A Snakes and Ladders board?
Difficult to say without seeing it, obviously you're basing the 2/3 hours on what it took you to do it, i might be slower? 2/3 hours of weeding time? I think i might have gone mad by then lol.
Seriously what is it?
Re: Slammed & Cammed Vinyls
Posted: Mon Jan 25, 2010 1:45 pm
by Galps-TypeR
Its a vinyl of a robot, similar to optimus prime..
It ahs lots of intricate parts to weed, thats why it took ages