Page 1 of 1
spoiler help
Posted: Mon Apr 26, 2010 8:52 am
by ram12
just got myself a corsa b spoiler but have no idea how to fit the thing
any help would be great
Re: spoiler help
Posted: Mon Apr 26, 2010 9:22 am
by Lacey_Corsa
did it come with a fitting kit?
mine came with all the bolts and instruction etc to fit it, taking it to a bodyshop to get done though
Re: spoiler help
Posted: Mon Apr 26, 2010 9:28 am
by ram12
no i took it off the back of another corsa down the scrap yard
got like bolts and stuff but theres only 2 so i dont know how to seal the rest down
i dont know of any body shops round my area and i bet it will cost me way more money than i have
Re: spoiler help
Posted: Mon Apr 26, 2010 11:51 am
by kie-1200sxi-shed
cut the four bolts off and stick the small black spoiler part and stick it down with no more nails or evo stick. then use good double sided tape to do the actual spoiler.
Re: spoiler help
Posted: Mon Apr 26, 2010 12:26 pm
by ram12
adhesive double sided tape?
Re: spoiler help
Posted: Mon Apr 26, 2010 1:08 pm
by kie-1200sxi-shed
yer mate or you can even use the no more nails etc to stick the main spoiler part aswell
Re: spoiler help
Posted: Tue Apr 27, 2010 8:10 am
by Lacey_Corsa
i would recommend using some screws at least combined with evostick etc
my fitting kit instructions say......
get some plastic strips and place them where the holes for the screws on the back of the spoiler originally were, make sure they overhang the spoiler so you can see them from the front
drop the spoiler in place and stick the flaps sticking out of the side of the spoiler to the car so they act as locators for the screw holes behind
the fitting kit i got recommends a 3mm drillbit to drill the holes, do them one by one and screw each one in as you go, miss fires with the drillbit can be filled with some putty or whatever and they shouldnt be seen as the spoiler sits on top of it
once you got all 4 in, go mad with the evostick aswell for a certain stick! dont wanna be racing down the bypass and have it fling off!