clutch
Moderator: Octane2097
-
- CB-Uk User
- Posts: 53
- Joined: Sat Jan 31, 2009 10:40 pm
- Location: westmids
Re: clutch
its because you ay gotta clue ginge lmao
- kie-1200sxi-shed
- CB-Uk User
- Posts: 1536
- Joined: Sat Mar 14, 2009 3:19 am
- Location: st helens.
Re: clutch
your gears are out .
jack up the car front and put axel stands under
open the bonnet and on the gear selctor tower "sticky up bit on the gear box" on the part thats facing the bulkhead there is a little round plastic plug.
pull it out
then get a 4.5mm drill bit and insert it into the hole while twisting the gear linkage "get a mate to ji...ggle the gear stick side to side a little"
it will slide in .5mm more when it set in and the linkage will now be locked. or ther will be a spring button on the front that you push in.
then get under the car lie near the rear gearbox mount and look up you will see a clamp next to a rubber gaitor and a 13mm bolt.
undo this..then inside the car unclip the gear gaitor and on the left hand side of the stick there is a hole line this up with the hole just below it and show another drill bit in that fits.
get back under the car and tighten the bolt you undid.
remove the dril bit from the gear stick, then the one from the gearbox.
put the plastic ...plug back in and clip the gear gaitor back on
lower the car
and all your gears should go straight in.
jack up the car front and put axel stands under
open the bonnet and on the gear selctor tower "sticky up bit on the gear box" on the part thats facing the bulkhead there is a little round plastic plug.
pull it out
then get a 4.5mm drill bit and insert it into the hole while twisting the gear linkage "get a mate to ji...ggle the gear stick side to side a little"
it will slide in .5mm more when it set in and the linkage will now be locked. or ther will be a spring button on the front that you push in.
then get under the car lie near the rear gearbox mount and look up you will see a clamp next to a rubber gaitor and a 13mm bolt.
undo this..then inside the car unclip the gear gaitor and on the left hand side of the stick there is a hole line this up with the hole just below it and show another drill bit in that fits.
get back under the car and tighten the bolt you undid.
remove the dril bit from the gear stick, then the one from the gearbox.
put the plastic ...plug back in and clip the gear gaitor back on
lower the car
and all your gears should go straight in.
iPhone 3G 8gb for sale £180ono inbox me for details
-
- CB-Uk Newbie
- Posts: 25
- Joined: Fri Apr 16, 2010 4:53 pm
Re: clutch
wew tithead watch it lol things sdoin my head in
and cheers for the reply mate but had gears before the clutch went and jsut done a simple change,
ive jsut been up when i dip the clutch i will start now but wen bring the clutch back up its still in gear cheers
and cheers for the reply mate but had gears before the clutch went and jsut done a simple change,
ive jsut been up when i dip the clutch i will start now but wen bring the clutch back up its still in gear cheers