Page 1 of 1
Rebuild C20XE Help
Posted: Tue Jul 13, 2010 10:22 pm
by d_gilly88
Is There Any Such Thing As A Rebuild Guide To ReBuild A RedTop XE? Any Help Cheers
Re: Rebuild C20XE Help
Posted: Tue Jul 13, 2010 10:24 pm
by jordyp
get a haynes manual for an old cavy or a haynes manual with a c20xe in it mate
Re: Rebuild C20XE Help
Posted: Wed Jul 14, 2010 4:10 pm
by bluecorsab
as above ^^ but if your not confident in doing it then dont do it, can just nacker a decent engine in the process
Re: Rebuild C20XE Help
Posted: Wed Jul 14, 2010 6:04 pm
by jordyp
exactly as bluecorsab said make sure everything is spotless before puttin it on and theres no oil or anything anywhere in the engine, then oil the parts up so it goes in easily and will keep it lubricated and make sure you use correct torque settings
Re: Rebuild C20XE Help
Posted: Wed Jul 14, 2010 6:08 pm
by PRICER
yep go for the haynes manual option, but really mate if you do get stuck stick up a post on here
we'l soon help you out
and if you get bored of it Liam will but it off you
Re: Rebuild C20XE Help
Posted: Wed Jul 14, 2010 6:15 pm
by bluecorsab
Re: Rebuild C20XE Help
Posted: Thu Jul 15, 2010 9:06 am
by corsa1686d
you would benefit from having it done proffesionally mate as a GOOD engine rebuild requires specialist tools and very fine tolerances also i would suggest having it hot tanked to clean everything
Re: Rebuild C20XE Help
Posted: Thu Jul 15, 2010 3:05 pm
by bluecorsab
acid dipped
Re: Rebuild C20XE Help
Posted: Thu Jul 15, 2010 5:17 pm
by jordyp
if you know where everything goes on the engine and all the torque settings and have it all timed up and spotless then do it yourself its not rocket science, will save ALOT of money gettin a proffesional to do it mate