89p and about half an hour
Moderator: Octane2097
-
- CB-Uk User
- Posts: 325
- Joined: Thu Dec 23, 2004 7:26 pm
- Location: bolton
89p and about half an hour
take ur rocker cover off, and scrub it with wire wool, this is mine
before:
After:
before:
After:
-
- CB-Uk User
- Posts: 68
- Joined: Wed Apr 20, 2005 1:11 pm
- Location: Leeds, UK
89p and about half an hour
My rocker cover is plastic, i started scrubbing mine with wire wool (not realising if was plastic) and all the paint started to come off!
Where can i get a rocker cover for an 1.4 SRi 8v?
Where can i get a rocker cover for an 1.4 SRi 8v?
-
- CB-Uk User
- Posts: 1684
- Joined: Thu Feb 24, 2005 8:23 pm
- Location: Essex
89p and about half an hour
yeah same with my vectra rocker cover, i put it in the acid bath at work for a bit and then realised its plastic when the dirt came off, i thought it was too light for aluminium. thats some shiny engine work going on there!
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
89p and about half an hour
Hmm think mines plastic as it has \"Vauxhall\" in a pretty pattern on it
pity I like the chrome effect
pity I like the chrome effect
-
- CB-Uk User
- Posts: 1084
- Joined: Sun Dec 05, 2004 12:13 pm
- Location: Driffield - Yokshire
Re: 89p and about half an hour
[quote=\".\"]tis quite amazing what 89p can do to your car!!! i poped to savers earlier and bought a boz of 10 brilo pads and heres the results after just half an hour and using 1 pad
it had actiually got worse than the before picture, but tis only other engine pic i could find. I\'m pretty impressed...
and before somebody says that i should remove that metal bit where the hot air feed plugs onto i tried that but the bolt got stuck in my only 10mm socket and i can\'t get it out and too fiddeley to get a spanner in there[/quote]
or you could use this autoglym engine cleaner, much better than brilo pads im preety certain
it had actiually got worse than the before picture, but tis only other engine pic i could find. I\'m pretty impressed...
and before somebody says that i should remove that metal bit where the hot air feed plugs onto i tried that but the bolt got stuck in my only 10mm socket and i can\'t get it out and too fiddeley to get a spanner in there[/quote]
or you could use this autoglym engine cleaner, much better than brilo pads im preety certain
-
- CB-Uk User
- Posts: 650
- Joined: Thu Dec 02, 2004 2:18 pm
- Location: Newcastle
89p and about half an hour
my engine doesnt look like urs is your an ecotec??
- PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
89p and about half an hour
si I\'m gona be rippin that heatshield off at PVS...
All the above comments are deemed an opinion, and in most cases
-
- CB-Uk User
- Posts: 1684
- Joined: Thu Feb 24, 2005 8:23 pm
- Location: Essex
89p and about half an hour
si I\'m gona be rippin that heatshield off at PVS...
seem to remember it needing a bit of persistance when i took mine off, i think i ground the edges of a spanner down
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
89p and about half an hour
Your engine bay looks completly diffrent to yours
anyone know of a website showing diffrent engine models etc?
be interesting to see
anyone know of a website showing diffrent engine models etc?
be interesting to see
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
89p and about half an hour
ahh
I *Think* mine is a C14 SE
tis complicated with all these diffrent versions!
I *Think* mine is a C14 SE
tis complicated with all these diffrent versions!
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
89p and about half an hour
Ahh I thought they was all MPI
Learn something everyday!
does anyone know of a page that compares them all?
mines ment to be 82 BHP but I have no idea if thats true or not
Learn something everyday!
does anyone know of a page that compares them all?
mines ment to be 82 BHP but I have no idea if thats true or not
-
- CB-Uk User
- Posts: 261
- Joined: Mon Feb 28, 2005 10:52 am
- Location: slough
89p and about half an hour
If you have a copy of total vauxhall, they have a spec section at the back that compairs all the sports ranges.
-
- CB-Uk User
- Posts: 1084
- Joined: Sun Dec 05, 2004 12:13 pm
- Location: Driffield - Yokshire
89p and about half an hour
total vauxhall is preety wank though, they think the corsa c is the corsa b, and the corsa a the corsa b which infact is the nova
-
- CB-Uk User
- Posts: 274
- Joined: Thu Apr 21, 2005 1:44 am
- Location: kent
- Contact:
89p and about half an hour
// same \'ere how can a CORSA a be a novaaaaaaargh??
-
- CB-Uk User
- Posts: 236
- Joined: Thu Apr 14, 2005 10:23 pm
- Location: Buxton Derbyshire NorthWest
89p and about half an hour
ahh even i know this bit
The Nova was the nova
In the design stages the nova had 2 names corsa or Nova, Nova got picked
the nova and the corsa are related by several parts, wheel hubs certain panels etc, the corsa is just an evolution on.
Unofficially the Nova was called the Corsa so when the \"real\" corsa came out it got nicknamed the Corsa B
So if you think about it if there\'s a b there must be an A somewhere ... Tada 1 Nova
Hope that makes sense
The Nova was the nova
In the design stages the nova had 2 names corsa or Nova, Nova got picked
the nova and the corsa are related by several parts, wheel hubs certain panels etc, the corsa is just an evolution on.
Unofficially the Nova was called the Corsa so when the \"real\" corsa came out it got nicknamed the Corsa B
So if you think about it if there\'s a b there must be an A somewhere ... Tada 1 Nova
Hope that makes sense