Page 1 of 1

Idle air control valve

Posted: Fri Aug 06, 2010 7:59 pm
by XxxR4NGERxxX
Hi does anyone know what the correct operation of these valves should be when actually doing their job?
For example on idle should it stay still or move in and out every few minutes and also what is it the tip pushes on as in the little screw on the throttle housing?

Re: Idle air control valve

Posted: Sat Aug 07, 2010 9:22 pm
by XxxR4NGERxxX
So no one knows how it should work?
Lots of posts from people advising other people to change theirs because its a common problem yet no one can say how they work?

Re: Idle air control valve

Posted: Sat Aug 07, 2010 10:25 pm
by dandadan
have you got a photo mate and I will do my best to help you, as your description is kinda blaggin my head lol

Re: Idle air control valve

Posted: Sun Aug 08, 2010 12:41 pm
by XxxR4NGERxxX
Hi mate there is a guide to cleaning one under corsa faq which contains pics.

Re: Idle air control valve

Posted: Mon Aug 09, 2010 11:46 am
by dmiller
I am assuming Idle Air Control Valve = Idle control valve.... Mine was broken and stayed still. My new one also stays still once the engine is running, however as you start the engine it moves out a bit to press on the throttle and then slowly (so slowly you cant really see it) moves back in. Easiest way is to check the rev needle. Started on cold the car will sit at 1500 RPM and slowly drop down to 930 RPM as the engine warms up. Does this help?

I never managed to open mine to clean it without snapping off all the plastic tabs as I am ham fisted muppet... the guide is good, Im just a tool ;)

Also when you repalce it you need a tool to reset it the EMU learned settings - I used one off the internet for £30 that I also used to read the EMU error codes.

Re: Idle air control valve

Posted: Mon Aug 09, 2010 7:34 pm
by XxxR4NGERxxX
Yeah thanks that helps a good bit was gonna get the vauxhall tool from fleabay but the price of the tool plus buying a laptop made it unworthwhile.

Re: Idle air control valve

Posted: Mon Aug 09, 2010 9:06 pm
by dandadan
does the tool fit all corsa b's? I have a 95 x14xe do you know if it will fit it as everyone I have found says they dont.

Cheers

Re: Idle air control valve

Posted: Mon Aug 09, 2010 10:03 pm
by dmiller
Dan - sorry mate I dont know - it works on my x10xe engine thats all I know!

Here is a link to a post I made on it:
http://forums.corsa-b.co.uk/viewtopic.p ... 15#p107079

Cheers,
David.

Re: Idle air control valve

Posted: Tue Aug 10, 2010 3:52 pm
by dandadan
Cheers mate, I checked your link in the post from the link above which goes to ebay showing the scanner you got, it says on there that its for 97 onwards. Gutted, thanks for your help anyway mate