1.4 Corsa SRI Project (Picture Heavy)
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
1.4 Corsa SRI Project (Picture Heavy)
Ok, got the car quite cheaply.. ok for nothing! It was an MOT failure, it failed on the sill (corroded) which has been welded, The drivers side front and back suspension was snapped (Replaced with lowering springs 40mm) The washer jets didn't work (easily sorted). and it only cost me £20 to have it delivered!
Here it is when i first got it,
Here it is next to my first ever corsa,
Now, a lot of people will like the next photo, a lotta people wont opinions vary.
-Jap style bodykit
-15" Unisport Alloys
Not yet lowered in this photo.
Alloys Fitted:
More pics coming soon people
Here it is when i first got it,
Here it is next to my first ever corsa,
Now, a lot of people will like the next photo, a lotta people wont opinions vary.
-Jap style bodykit
-15" Unisport Alloys
Not yet lowered in this photo.
Alloys Fitted:
More pics coming soon people
- nath2905
- General Moderator
- Posts: 1869
- Joined: Mon Jan 25, 2010 7:03 pm
- Location: Stoke On Trent
Re: 1.4 Corsa SRI Project (Picture Heavy)
the wheels look smart, u just need a pic with the car and wheels, but like you say people will and wont like that bumper, i dont it looks too big for the size of the car, but thats my opinion, nice car tho
The Future's Bright, The Future's Orange!
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679
Holidays Are Coming....
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
Cheers bud, will have more pics soon though which has had a bit more work done to it
-
- CB-Uk User
- Posts: 96
- Joined: Tue Feb 02, 2010 7:01 pm
- Location: North Yorkshire
- Contact:
Re: 1.4 Corsa SRI Project (Picture Heavy)
No i like as long as you don't put a dustbin lid exhaust and lex'arse' lights it could look good is it a full body kit and does it have spoiler ??? and really like the alloys
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
hey mate, it is a full bodykit, front & rear bumpers, side skirts and wider wheel arches. i have no plans for a new exhaust but was thinking of getting one of those tips that go on the end and it currently has a sri spoiler on it but as of tomorrow it will have a furious 2 spoiler. It is a Corsa b 1.4 SRI so interior is good. I'm also thinking of smoked back lights but what do you think? Cheers for the comment will post more pics up soon peeps
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
Ok, went out today and took some more photos how it stands.
Lowered 40mm:
Started to colour code some of the interior:
..
Decided just to buy an exhaust tip for now, i do have a jap style back box and 6" big bore but not at this moment!:
A few more pics:
To be debadged:
Wheel arches and side skirts to go on:
Dunno whether to glue this on?
Needs a good clean, can see some polish from last time i never wiped off, some fading and rest of bodykit fitting properly (Screwed on with screws TEMPORARILY). Maybe dewiper it, smoked lights, angel eyes.. What do you think?
Lowered 40mm:
Started to colour code some of the interior:
..
Decided just to buy an exhaust tip for now, i do have a jap style back box and 6" big bore but not at this moment!:
A few more pics:
To be debadged:
Wheel arches and side skirts to go on:
Dunno whether to glue this on?
Needs a good clean, can see some polish from last time i never wiped off, some fading and rest of bodykit fitting properly (Screwed on with screws TEMPORARILY). Maybe dewiper it, smoked lights, angel eyes.. What do you think?
-
- CB-Uk User
- Posts: 96
- Joined: Tue Feb 02, 2010 7:01 pm
- Location: North Yorkshire
- Contact:
Re: 1.4 Corsa SRI Project (Picture Heavy)
Right i think if you change the spoiler and put your 6 foot wide exhaust on or whatever it is you will RUIN a very good car i think if you are putting wide arch body kit on you should maybe get wheel spacers Also get them badges off and personally i think it would make such a difference to the back end if you smoothed the boot i would also color code everything door handles the black bits that are still on the mirrors scuttle pannel everything but then it would look quite nice i like the body kit and thats unusual for corsa's
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
Hiya mate, im not putting the exhaust on, im just putting the tip on which is on the photos above. I am getting round to colour coding it and debadging is next on my list. Not sure if i could manage to smooth it but i'm going to look out for one already done that i can buy. Cheers for your comment mate.. I will upload more pics soon of what ive done.
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
Ok mate, got it outta the garage today after swapping back boot from my old corsa (better cond & had no spoiler on so was easier) then i put rear shocks back on, fitted the spoiler i just bought then brought it out to take pics.. Here it is as it stands
(Phone pic below)
I then couldn't resist taking a little sneak hear of what my exhaust may sound like as i got a new exhaust today (new to me) its about 2.5" reasonable shape and sounds ok,not too loud and doesn't look like a dustbin.
you might lol at the next pic
and this one..
Obv it was blowing as it wasn't sealed but i shall be fitting it tomorrow and i don't know what else is on my list as of yet..
(Phone pic below)
I then couldn't resist taking a little sneak hear of what my exhaust may sound like as i got a new exhaust today (new to me) its about 2.5" reasonable shape and sounds ok,not too loud and doesn't look like a dustbin.
you might lol at the next pic
and this one..
Obv it was blowing as it wasn't sealed but i shall be fitting it tomorrow and i don't know what else is on my list as of yet..
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
Ok, little update, dragged the wheel arch trims out of the garage today,
i first drilled and countersunk them:
Then i got a little distracted with the interior and finally managed to get the center console out:
Then sprayed it..
i haven't put it back in yet as it was still tacky, i've also took out the door handle surrounds to be sprayed.. haven't figured out how the heater surrounds come out yet any help?
I forgot to show y'all that i fitted the exhaust eventually
i put the trims on temporarily with 2 screws just for now..
i might also add that i got a little carried away with photos, a lot of hard work went into painting them wheel arch pieces and cutting & shaping them.. the hardest part will be fitting it all properly.. Let me know what y'all think so far people
i first drilled and countersunk them:
Then i got a little distracted with the interior and finally managed to get the center console out:
Then sprayed it..
i haven't put it back in yet as it was still tacky, i've also took out the door handle surrounds to be sprayed.. haven't figured out how the heater surrounds come out yet any help?
I forgot to show y'all that i fitted the exhaust eventually
i put the trims on temporarily with 2 screws just for now..
i might also add that i got a little carried away with photos, a lot of hard work went into painting them wheel arch pieces and cutting & shaping them.. the hardest part will be fitting it all properly.. Let me know what y'all think so far people
-
- CB-Uk User
- Posts: 212
- Joined: Mon May 25, 2009 11:57 pm
Re: 1.4 Corsa SRI Project (Picture Heavy)
Nice car blad, looks propa gangsta, luvin' tha bodykit it's smart as chips! Goes well good wif the cossie stylie spoiler on the back.
Love it blad, brap
Love it blad, brap
Drive it like you stole it!!
Then when it breaks, push it like you stole it!!!!
Then when it breaks, push it like you stole it!!!!
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
ROFL fatboi, made my day lol..
anyway,
I haven't really done much since the last update just give it a clean and put the center console in will be doing more on it soon so will get more pics
Thanks to everyone so far
anyway,
I haven't really done much since the last update just give it a clean and put the center console in will be doing more on it soon so will get more pics
Thanks to everyone so far
- Timmeh
- CB-Uk User
- Posts: 80
- Joined: Thu Apr 15, 2010 6:02 pm
- Location: Northfield, Birmingham
Re: 1.4 Corsa SRI Project (Picture Heavy)
Wow this car should come with a parental advisory notice, its the corsa from hell lol, scary poo! Not to my taste in the slightest though im afraid, but whats with the mesh on the front bumper? Needs tidying that, will make a big difference to the general presentation of Lucifers hatchback
Pre-facelift Bumpers FTW!
- Grant_j
- CB-Uk Newbie
- Posts: 44
- Joined: Fri Aug 06, 2010 9:27 pm
- Location: Cumbria, UK
Re: 1.4 Corsa SRI Project (Picture Heavy)
lol mate you dont need to lecture me, i like it.. you might not, i dont particularly like yours but im not gona post a load of unuseless rubbish on your thread
-
- CB-Uk User
- Posts: 65
- Joined: Wed Dec 02, 2009 6:07 am
- Location: hexham, northumberland
Re: 1.4 Corsa SRI Project (Picture Heavy)
what happened to your own forum mate? it doesn't work