Page 1 of 1

fitting a passenger door window (3dr)

Posted: Wed Sep 01, 2010 4:38 pm
by Shokkz
the other night, my car window got put through :(, ive bought a new one, and was going to take it to a garage to get fitted, but i figured il have a go myself.

its the roll up window style, not electric, i was wandering if anyone had a guide i could follow to do it myself? or a video somewhere.

thanks guys, James

Re: fitting a passenger door window (3dr)

Posted: Wed Sep 01, 2010 5:13 pm
by Sanandreas21
Ill go and have a look at my car now but im sure it should be very straight forward, In the door there are some glass guides which can be removed with one or two bolts. Also any strips of rubber on the top of the door being removed would be good to remove as the glass will need to be slid down the door.

Before all of this check how to remove the current glass pieces in the door, where the new piece of glass will sit. Make sure to clean up as much of the glass as you can.

****Edit: Hope this is some help

I dont think the strips actually need removing, but i found this video and it cant be that much different.****

http://www.youtube.com/watch?v=CfCIwDsM ... re=related