Page 1 of 1
HELP please :)
Posted: Wed Sep 08, 2010 9:04 pm
by dandadan
Orite lads,
I need a new ecu for my car but theres two codes on the ecu so which code is it I need to match?
My ecu codes= 16213759 & D95031
Ecu I can buy codes= 16213759 & 001621
Would this ecu work on mine or not?
Cheers
Dan
Re: HELP please :)
Posted: Thu Sep 09, 2010 10:44 pm
by dandadan
bump
Re: HELP please :)
Posted: Sat Sep 11, 2010 10:22 am
by dandadan
Anyone?
Re: HELP please :)
Posted: Sat Sep 11, 2010 10:35 am
by PRICER
personally i wouldnt just change the ECU, because your chip inside your key will probably be different to, so your best bet is to get the whole lot ecu, chip and responder? i think... not sure if you need this but you might,
Re: HELP please :)
Posted: Sat Sep 11, 2010 4:12 pm
by bluecorsab
what engine is it for?
Re: HELP please :)
Posted: Sat Sep 11, 2010 4:13 pm
by dandadan
yeah I do need all 3 as there coded together. What I need to know is if any ecu from a 1.4 16v corsa b will fit. Each ecu has different numbers and codes on them to do with software updates etc. I have found one which has 32 pins in each connector and my car has 32 pins in each plug so I am hoping it will work, I just wanted if the codes had to match
x14xe
Re: HELP please :)
Posted: Wed Sep 15, 2010 8:34 am
by dandadan
got an ecu, transponder and reciever, all the codes were different to mine but both sockets in the ecu had 32 pins just like mine, plugged it in and my car started straight away. Happy days, now the work can commence, I will try do a project log asap
Cheers guys