rh cups ET45
Posted: Mon Oct 11, 2010 9:07 pm
Here for sale are my RH cups that i had imported from germany.
they are 14"x7" and have an ET of 45 PCD 4x100
all are fitted with 185/55/14 tryes there a german brand that i forgot to note down so will update tomorrow with brand with loads of thread left
the dishes are polished and the spokes are vauxhall ultra blue (previously flame red).
also have all four centre caps
one of the polished dishes has a mark on it
all four wheels have a tiny bit of red showing between the dish and spokes but can easily be removed with some paint thinner and is not obvious inless very close.
two wheels have a little patch where they have gone back to the primer where they got knocked with a wheel bolt.
theres some small laquer runs but some wet and dry should remove them
i have to tried to be as honest as i can and have tryed to picture all the above bits.
first wheel
second wheel
third wheel
(theres not that much red its the flash off the camera)
forth wheel
how they looked
Price: £200
Location: Shropshire
they are 14"x7" and have an ET of 45 PCD 4x100
all are fitted with 185/55/14 tryes there a german brand that i forgot to note down so will update tomorrow with brand with loads of thread left
the dishes are polished and the spokes are vauxhall ultra blue (previously flame red).
also have all four centre caps
one of the polished dishes has a mark on it
all four wheels have a tiny bit of red showing between the dish and spokes but can easily be removed with some paint thinner and is not obvious inless very close.
two wheels have a little patch where they have gone back to the primer where they got knocked with a wheel bolt.
theres some small laquer runs but some wet and dry should remove them
i have to tried to be as honest as i can and have tryed to picture all the above bits.
first wheel
second wheel
third wheel
(theres not that much red its the flash off the camera)
forth wheel
how they looked
Price: £200
Location: Shropshire
