Page 1 of 1

dash lights

Posted: Mon Oct 18, 2010 8:02 pm
by seanseansean
I was driving to work this morning and I hit a pot hole.
As it was quite early I had my lights on, after hitting the pot hole the dash light now don't work at all.

So now I cant see my speedo when its dark. can anyone help?

Re: dash lights

Posted: Mon Oct 18, 2010 8:28 pm
by matty101
cud be afew things.

bad connection
blown fuse
check the dimmer switch is turned up
blow bulbs
bad earth.

Re: dash lights

Posted: Thu Oct 21, 2010 5:57 pm
by seanseansean
Okay thanks.

How do I remove the dash to see any loose connections?

Re: dash lights

Posted: Sat Oct 23, 2010 7:19 pm
by dmiller
Carefully! Working on the dash is a total nightmate! Top tips here is any tool you use on the plastic to grip or lever wrap it in tape or a cloth first. It stops you scratching or marking the plastic - I wish I had!

The haynes manual has a good strip down in it - although if you has removing the air vents do it carefully as its easy to snap the tabs and then they flop around freely when you put them back in... annoying if it happens!

Re: dash lights

Posted: Sat Oct 23, 2010 11:00 pm
by seanseansean
Thank you.
Wont be removing the air vents. just need to get behind the speedo ect.

Re: dash lights

Posted: Sun Oct 24, 2010 12:49 am
by Sam58
You should try and reach as many connectors as possible, under the dash, it could be a bad connection on one of these, before you try stripping out speedo etc. Also remove the glove box and have a search for connectors there as well. You just might get lucky, and save yourself a lot of bother and yards of skin!
Sam58

Re: dash lights

Posted: Sun Oct 24, 2010 4:41 pm
by seanseansean
Okay took out the speedo/rev/ petrol ect and all looked fine.

Witch fuse should i check and if it was the fuses, also if it was the fuse wouldn't the whole thing not work?

Where should i check for loose connections and what should i look for? or any certain wires?

Its on the lights on the speedo/rev/petrol dash, the speedo and everything works fine. just wont light up.

Re: dash lights

Posted: Sat Oct 30, 2010 1:55 am
by seanseansean
bump

Re: dash lights

Posted: Sat Oct 30, 2010 6:44 pm
by matty101
when u had the clock/speedo out did u check for blown bulbs and broken copper tracks?

Re: dash lights

Posted: Fri Nov 26, 2010 5:10 pm
by seanseansean
well the bulbs are fine and so is the copper tracks.
i even got some new clocks and tyhey didnt light up :(