Page 1 of 1
1.2 Corsa GLS 1st car project
Posted: Mon Feb 28, 2011 1:40 am
by Mr4
Re: 1.2 Corsa GLS 1st car project
Posted: Mon Feb 28, 2011 5:58 am
by jacobyte
like your Corsa Gls 5d, i also have same model and 5d as well, look forward to seeing, what you modifying on it, may do to mine as well if i like idea's
Re: 1.2 Corsa GLS 1st car project
Posted: Mon Feb 28, 2011 3:50 pm
by matty101
welcome! nice corsa, not many 5doors on here so it will be nice to see what you do to it.
Re: 1.2 Corsa GLS 1st car project
Posted: Mon Feb 28, 2011 11:28 pm
by Mr4
hiya mate well what i have got planned is just a few little mods really, what am going to do is put an exhaust on which i have bought just need to fit, lower it 35mm i have bought the springs just waiting for them to arrive so i can fit them
maybe get a k+n panel filter and of course some 15" alloys which in time in will power coat them black.
didnt manage to get pics today even tho i finished buffing the corsa because work was busy today so will take them in the daylight tomorrow and upload them.
Re: 1.2 Corsa GLS 1st car project
Posted: Tue Mar 01, 2011 3:34 pm
by 98CorsaDre
looks like a good project, keep us updated man!
Re: 1.2 Corsa GLS 1st car project
Posted: Tue Mar 01, 2011 9:07 pm
by Mr4
Re: 1.2 Corsa GLS 1st car project
Posted: Tue Mar 01, 2011 9:10 pm
by 98CorsaDre
looks brand-new
Re: 1.2 Corsa GLS 1st car project
Posted: Tue Mar 01, 2011 9:20 pm
by nath2905
hi and welcome nice 5 door there
Re: 1.2 Corsa GLS 1st car project
Posted: Tue Mar 01, 2011 10:20 pm
by Mr4
doest look to bad does it, it has got just a bit of rust on the passanger door and a bit on the boot as you can see from the pics, tomorow my new cambelt is being fitted and my exhaust
, thought i would fit a new cambelt because its on 78,000 and just piece of mind.
Erm hopefully thursday i will be fitting my alloys i will take a few pics to see what you corsa lovers think
.
And getting my 35mm springs fitted on saturday so yeh
just need time to hurry up now lol.
Re: 1.2 Corsa GLS 1st car project
Posted: Wed Mar 09, 2011 8:32 pm
by Mr4
Re: 1.2 Corsa GLS 1st car project
Posted: Wed Mar 09, 2011 10:03 pm
by nath2905
alloys look better
, also better with out the center's imo
Re: 1.2 Corsa GLS 1st car project
Posted: Wed Mar 09, 2011 10:22 pm
by matty101
its amazing what a set of alloys can do, keep up the good work.
Re: 1.2 Corsa GLS 1st car project
Posted: Thu Mar 10, 2011 5:52 am
by jacobyte
Yeaaa m8 looking good, so urs is a 96-97 model, like that you taken off the plastic bump strips from the doors, was gonna do that to mine but was told it might have holes underneath it attaching to my doors so have taken the safe than sorry route and not bothered, mines a 99-00 model, also nice to see what mine could look like if i lowered mine as well, can't wait to see what's next on your list:thumbs:
Re: 1.2 Corsa GLS 1st car project
Posted: Thu Mar 10, 2011 12:06 pm
by Mr4
Ite mate yeh it's a 96
it really is in good nick to say it's a p reg
and I would advise that you take the plastic strips Off the side it's just a bit of ball ache taking the glue off afterwards, took me half hour to do one side lol but it was worth it
.
All I am planning to do now is get a air filter, exhaust and spray my alloys Black then I am a happy man.
Thanks for the comments guys, it's nice to see that my Corsa is looking good to other ppl
.
Re: 1.2 Corsa GLS 1st car project
Posted: Thu Mar 10, 2011 7:56 pm
by 98CorsaDre
looking good! the alloys sprayed black would look awesome, I did mine and im verry happy!