Page 1 of 1
AnyMOT guys on? re rust chasis box section
Posted: Fri Apr 15, 2011 6:07 pm
by Paul666
Took car to get sum welding done today chasis box section at least thats what i think its called its the bits that cme off chasis legs and xtend down 2 sill and directly behind front wheel arch plz correct me if im wrng it wud explain somethings haha! Anyway mechanhc startd welding and said it cudnt be done as the torch was blowing straight through as its badly rotten! He said its either goina be a big job to put right or i cud fibreglass it then bodyfill to get rid of any imperfections and then underseal. Me thinking this is a structural point (chasis box sec) thought that would be a big no no! But he said as lomg as mot tester cnt put screwdriver through it will pass! Is there any truth in this? And am i rite in thinkin its a structural point? Cheerz guys!
Re: AnyMOT guys on? re rust chasis box section
Posted: Fri Apr 15, 2011 6:18 pm
by PRICER
well yea they are structural points the chassis members, but at the end of the day its down to you, can weld it up but it might take a bit of doing or fibreglass it and paint it over, then MOT it, then sell it on and look out for another corsa.
Re: AnyMOT guys on? re rust chasis box section
Posted: Fri Apr 15, 2011 6:38 pm
by Paul666
Cheers pricer i did the boot with fibre glass came out a treat! So im thinking just doing same with chasis memberz (cheers 4 putting me right on name) so think it will pass mot with fibreglass and underseal! ?
Re: AnyMOT guys on? re rust chasis box section
Posted: Wed Apr 20, 2011 8:25 pm
by Paul666
Before i fibreglass this box section just wondring if anyone has had same problem! Heard it is a weak point in the corsa b chassis and if so did they get it welded up was it expensive? And also if anyone has fibreglassed this bit of a corsa! Cars to good to get rid only got 60k on it and i was wanna start lowering it etc. So wud rather keep just depends how much welding would be. Cheers.
Re: AnyMOT guys on? re rust chasis box section
Posted: Thu Apr 21, 2011 8:10 pm
by skylinedave
its better to just weld it up, just tell him to use a piece of metal, to weld over the hole. its not a big job, just a boring and awkward job working/welding under a car.
Re: AnyMOT guys on? re rust chasis box section
Posted: Thu Apr 21, 2011 9:01 pm
by Paul666
Cheers buddy its the entire end of chassis member that needs done tho was goina get a plate welded to the 2 bits that cum down but those bits are so rusted cnt weld to em either! Might take it to another garage 2mo get a 2nd opinion!
Re: AnyMOT guys on? re rust chasis box section
Posted: Sat Apr 23, 2011 11:09 pm
by skylinedave
It's a longer job dealing with fiberglass and filler, compared to welding a new panel on, the fact the guy you went to to do the job suggested fibreglassing the whole end of your section just does not sound proffesional, and is not thinkin bout the safety of his customer, end of the day its your choice, but welding is much recommended. Hope helps mate.
Re: AnyMOT guys on? re rust chasis box section
Posted: Mon Apr 25, 2011 8:48 pm
by Paul666
Thanks mate! Goinna take it to a bodyshop 2mo that specialise in welding im hoping it can be repaired without being to expensive! Im hoping it can be saved seems a comon part on corsa bs for rotting away so heres hoping;) thanks again!
Re: AnyMOT guys on? re rust chasis box section
Posted: Tue Apr 26, 2011 7:14 pm
by Paul666
Went to a accident repair body shop today and iv been qouted 60quid for both sides 2hr work guy said! So its looking good for my corsa just hope he aint like other dude and says its goina b a big job. Dude seemed to knw what he was talking bout and also said the carpets will have to get lifted so should be an entire new sectiom i think as opposed to a plate at bottom! Will post up when jobs done incase any1 else gets same probs! Cheers guys!
Re: AnyMOT guys on? re rust chasis box section
Posted: Wed Apr 27, 2011 9:04 am
by skylinedave
that sounds better m8, hope it gets done soon,