Page 1 of 1

fault code

Posted: Wed Jul 06, 2011 9:01 pm
by scotsvampyr
ok as many of you will have seen i have a problem that is still unsolved i wont go into it ill tell you this bit and someone may be able to help hopefully,

now i heard of the test when driving push the two buttons where the date should be and its reading was
f 12
f 92

now does anyone know what these are or post a link to topic on faults :?

got it chears anyway

Re: fault code

Posted: Fri Jul 08, 2011 11:20 am
by jayybull

Re: fault code

Posted: Wed Jul 20, 2011 2:34 pm
by scotsvampyr
ok whats the fault code 95 Hot start valve what is the cause of this problem

Re: fault code

Posted: Tue Jul 26, 2011 12:07 pm
by scotsvampyr
this has been up for 6 days and no reply yet someone has bound to had this problem before

Re: fault code

Posted: Thu Jul 28, 2011 3:02 am
by Octane2097
the 2button "trick" dosnt show fault codes sadly
on the 1.0i and 1.2 16v motors its not possible to find faultcodes without a diagnostic computer.
btw a hotstart valve is somthing for turbocharged engines (like the C20LET) :)

what exactly is wrong with your corsa? sorry i dont frequent here much these days, had a look and couldnt find any threads regarding your car.

Re: fault code

Posted: Tue Aug 09, 2011 9:50 pm
by scotsvampyr
my car will turn over without starting for ages then it will start after 4 or 5 mins but the two button said f 12 then f 95 ive changed the cam sensor but unfortunatly i hve to bump it the now cos i think (hope) i fried the starter

Re: fault code

Posted: Wed Aug 10, 2011 6:43 pm
by octane41
where bouts are you?

Re: fault code

Posted: Wed Aug 10, 2011 8:11 pm
by Octane2097
i bet its the crank sensor, had this problem with mine
and is a common probem on the 1.0 12v

could start it first thing in the morning when it was cold, but after it warmed up and you tryed to start it warm it wouldnt fire.
£25 for a new crank sensor and about a hr fitting (its right at the back of the engine)

id still reccomend getting it on a obd2 machine but i reccon thats it.

Re: fault code

Posted: Thu Aug 11, 2011 2:10 pm
by octane41
i can run diagnostics and i've got a starter motor. if its crank sensor i can also fit it for you.

Re: fault code

Posted: Sat Aug 13, 2011 8:52 am
by scotsvampyr
well i am in tyndrum scotland , and i bet youre in england lol

Re: fault code

Posted: Sat Aug 13, 2011 2:54 pm
by octane41
am in airdrie but its bout 70 miles