So here goes...
I put my car on coilovers recently and dropped it as far down as the springs would let me (with helpers on), this was all good as I had steel wheels on at the time.. Now I've got some cav slabs on, low profile tyres but it's still a squeeze... The problem I had was the inside of the tyre was catching on my coilover and rubbing away at the tyre. I then adjusted the spring strut so it sat just off the tyre but when doing this I had one wheel pointing out over while the other one was straight..?
So I then fiddled with the track rod end to try to align the wheels, this worked for about a day (with the tracking drastically out), but with more pointless fiddling I knocked the wheel back off worse than before. Now we've got the wheels aligned, the tracking well out and when I click full lock it tries to pull my wheels further round. I think that's because one side is longer with us screwing the track rod end out to straighten them up...
I took it into the garage to get the tracking sorted but they said it was too low and I should swap the wheels over and bring it back down. Hopefully I wont have the same problem again..
Any ideas?
Corsa Alloy Nightmare
Moderator: Octane2097
- Joely
- CB-Uk Newbie
- Posts: 21
- Joined: Thu Apr 21, 2011 7:37 pm
Corsa Alloy Nightmare
Corsa Club 1.0L 12v.
Coilovers (Right down), Debadged, Black L.E.D Side repeaters, Gloss Black Cav Slabs, 8K HIDs, LED Dash conversion, Sportex Racing straight through pipe & 3" tip Sportex Backbox.
Coilovers (Right down), Debadged, Black L.E.D Side repeaters, Gloss Black Cav Slabs, 8K HIDs, LED Dash conversion, Sportex Racing straight through pipe & 3" tip Sportex Backbox.
- c16se corsa
- CB-Uk User
- Posts: 271
- Joined: Thu Jan 27, 2011 3:29 pm
- Location: Pontefract
Re: Corsa Alloy Nightmare
That low? or Lower? with mine tht low on coilovers i put some camber bolts on front and gave it a slight touch of negative just to bring it away and same for the back but did the cheap washer trick
If its not bodged then its not "propper"
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
- matty101
- Senior Moderator
- Posts: 2961
- Joined: Thu May 28, 2009 8:54 pm
- Location: Hexham
Re: Corsa Alloy Nightmare
are they fk coilovers? i've had some do exactly the same, i tried all sorts (spacers etc.) but in the end i just sold them on and got some 60mm springs and uprated shocks.
OFFICAL DVLA DATA:
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!
1414 - corsa gsi's on the road in 2008.
735 - corsa gsi's currently on the road and 436 SORN
Basicly you would have to be a right tw*t to break one for parts
Thanks to everyone for an awsome weekend at pvs!