Page 1 of 1

i have brought a 16v odear ha

Posted: Sat Jan 14, 2012 5:48 pm
by nath2905
right i brought a 16v today,
started up mint, ticked over mint, drove good,
then it broke down on way home, it cut out, left it 5 then it started and drove again, so changed the crank shaft sensor already, and blanked EGR, thats has sorted the cutting out, it seems to have done,
but now it will jerk, like no power, then eml will come on, so i took foot off accelerater and it goes off, and carries on fine,
also the temp gauge goes to 90 nearly as soon as you turn it on, then goes back down and read's it properly

:meh:

any idea's? its got be a sensor of some sort?

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 1:54 am
by matty101
1.2 16v? wa gona suggest the paper clip test but wont work :/

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 11:53 am
by nath2905
matty101 wrote:1.2 16v? wa gona suggest the paper clip test but wont work :/
yeah mate a 1.2 16v

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 4:49 pm
by jamiejones77
Air flow sensor, happened to mine when i bought mine.

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 6:54 pm
by scorpiotn1
yea i replaced air flow but was still driving crap had to replace ICU and that fixed it. and recently it was cuting out so replaced crank sensor as well.

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 9:13 pm
by jamiejones77
Tried plugging it in to a laptop somewhere and having fault codes erased?? Recently ive had head gasket replaced cos I went to start it one morning and it was just turning over really fast. Lost all my compression and wouldnt start. Changed timing chain kit and aux belt while it was in bits. If you have changed everything mechanical its electrical. If you have changed everything electrical its mechanical. I read your thread this morning and to have this many problems on so little miles weird. Mine has had 2 problems from when I bought it at 52000 miles to now at 84000. Its had a airflow meter and a head gasket.

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 10:17 pm
by nath2905
cheers guys, ive had a load say air flow now, but local shop dont stock them so thats a bummer, but not driving it till friday, so hopefully get one for friday and fingers crossed that will sort it,
but will still have it pluged in, we did try with my uncle's one but it wouldnt have it,

then its had the main sensors i think,
EGR, Crank shaft, Water Temp, and wen i get this other

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 11:10 pm
by matty101
dont buy a brand new mass air flow meter! when i priced one up they wanted over £200!

Re: i have brought a 16v odear ha

Posted: Sun Jan 15, 2012 11:18 pm
by scorpiotn1
Nath, dono if this helps or if you already know, but you should just need to replace the sensor that fits into the air flow pipe, instead of buying pipe and all.
i have the old air flow sensor that the mechanic took out. he said the filiment was done (appernelty ... :meh: )

This is my old one...
cost me £70 at the time. you might be able to find one cheaper online.

Image

Re: i have brought a 16v odear ha

Posted: Wed Jan 25, 2012 11:53 am
by nath2905
sorted that problem now guys thanks, just have a problem that some thing is bent on the front as the rack catches when on left hand down hmm

Re: i have brought a 16v odear ha

Posted: Wed Jan 25, 2012 1:16 pm
by matty589
that may be a iner rack arm. have a look at it u should be able to see if its bent :)