tyre wear options
Moderator: Octane2097
- vcorsab
- CB-Uk User
- Posts: 223
- Joined: Fri Dec 16, 2011 8:52 pm
tyre wear options
Right, when you lower your car your tyres go bald on one side, is there anyway of getting round this ? if i lower my car i want perfect tyres, what could sort it ?
-
- CB-Uk User
- Posts: 350
- Joined: Tue Apr 26, 2011 10:05 pm
- Location: bristol
tyre wear options
Get the tracking done after you lower it.
- vcorsab
- CB-Uk User
- Posts: 223
- Joined: Fri Dec 16, 2011 8:52 pm
Re: tyre wear options
Ok is there anything else that should be done ?
- Big C
- CB-Uk User
- Posts: 640
- Joined: Sun Oct 10, 2010 3:26 pm
- Location: Farcet, Peterborough
tyre wear options
It'll only go bold on one side normaly If ur tracking out or if u got camber if they all fine and ur out side edge on tyres are being worn quicker it's cuz u Corning harder as ur lower and stiffer
- Bazzer-1988
- CB-Uk User
- Posts: 70
- Joined: Wed Jul 04, 2012 10:34 pm
- Location: Crewe Cheshire
- Contact:
Re: tyre wear options
corner edging wear can be cause by positive or negative tracking which is an easy thing too do but camber can only some time be adjust on the front so i dunno if camber can be adjusted on the rears best option too do is like others have said is track the vehicle too the correct setting of >> 1N+1
Car : Flame Red 1.2 SXI >> Bronte II
Add Me On Facebook >> https://www.facebook.com/B4ZZER
Add Me On Facebook >> https://www.facebook.com/B4ZZER
- PRICER
- CB-Uk User
- Posts: 3510
- Joined: Sun May 10, 2009 9:21 pm
- Location: ludlow shropshire
Re: tyre wear options
Or buy some camber correction bolts off eBay
TURBO LAG IS JUST FOREPLAY
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
- Big C
- CB-Uk User
- Posts: 640
- Joined: Sun Oct 10, 2010 3:26 pm
- Location: Farcet, Peterborough
tyre wear options
Well most coilovers hav camber adjustment on then for the front, and then rear don't normaly change but if they do then u can get camber shins like I've put in mine on the rear to give it camber u can use it to get rid of camber if u don't want it
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
tyre wear options
Or be ghetto and use washers on the rear but I wouldn't advise it lol!
- vcorsab
- CB-Uk User
- Posts: 223
- Joined: Fri Dec 16, 2011 8:52 pm
Re: tyre wear options
Aha wont be using bolts ! So get camber shins then get the tracking done ? Dont know what they are ill need to have a look