Page 1 of 1
tyre wear options
Posted: Thu Sep 13, 2012 10:46 pm
by vcorsab
Right, when you lower your car your tyres go bald on one side, is there anyway of getting round this ? if i lower my car i want perfect tyres, what could sort it ?
tyre wear options
Posted: Thu Sep 13, 2012 11:36 pm
by matty589
Get the tracking done after you lower it.
Re: tyre wear options
Posted: Fri Sep 14, 2012 12:10 am
by vcorsab
Ok is there anything else that should be done ?
tyre wear options
Posted: Fri Sep 14, 2012 2:27 am
by Big C
It'll only go bold on one side normaly If ur tracking out or if u got camber if they all fine and ur out side edge on tyres are being worn quicker it's cuz u Corning harder as ur lower and stiffer
Re: tyre wear options
Posted: Fri Sep 14, 2012 5:51 am
by Bazzer-1988
corner edging wear can be cause by positive or negative tracking which is an easy thing too do but camber can only some time be adjust on the front so i dunno if camber can be adjusted on the rears best option too do is like others have said is track the vehicle too the correct setting of >> 1N+1
Re: tyre wear options
Posted: Fri Sep 14, 2012 10:13 am
by PRICER
Or buy some camber correction bolts off eBay
tyre wear options
Posted: Fri Sep 14, 2012 10:55 am
by Big C
Well most coilovers hav camber adjustment on then for the front, and then rear don't normaly change but if they do then u can get camber shins like I've put in mine on the rear to give it camber u can use it to get rid of camber if u don't want it
tyre wear options
Posted: Fri Sep 14, 2012 11:34 am
by gazza_no7
Or be ghetto and use washers on the rear but I wouldn't advise it lol!
Re: tyre wear options
Posted: Sat Sep 15, 2012 10:49 pm
by vcorsab
Aha wont be using bolts ! So get camber shins then get the tracking done ? Dont know what they are ill need to have a look