Page 1 of 1
Bonnet raiser help?
Posted: Sun Jun 16, 2013 5:38 pm
by Harkus
Put them on today and here's what happens...
There sitting on the two black plastic trims and won't allow the bonnet arms to retract and the one bracket is about 2-3 cm's out on the drivers side not allowing me to bolt the back of the hinge on. Really had to force the drivers hinge for me to get one bolt in...
There sitting on these:
Any ideas guys?.
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 6:06 pm
by gazza_no7
Throw them in the bin... They are useless and look crap tbh. But not a clue myself why they won't fit :s
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 7:14 pm
by Harkus
Entitled to your opinion pal but I love the look of a raised bonnet
, we all have out own taste and that what makes the world of modifying unique and so on
.
Apparently my mate who made them says he ain't got the black trims on his car that's blocking them... And I can't remove them from mine either
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 7:22 pm
by johnny
Just cut the bit that sits under th scutle on the passenger side and just bodge it in on drivers
noones going to see it anyway
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 7:29 pm
by gazza_no7
Exactly
i like it on certain cars just not corsas
like the above just bodge it no one can see :p
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 7:33 pm
by Harkus
Pain In the are its driving me f**k mad!.
Re: Bonnet raiser help?
Posted: Sun Jun 16, 2013 11:20 pm
by johnny
Whats actuly catching is it the hinge itself or bolts on th lifter plate
Re: Bonnet raiser help?
Posted: Mon Jun 17, 2013 2:09 am
by Harkus
johnny wrote:Whats actuly catching is it the hinge itself or bolts on th lifter plate
The brackets it's self pal, they are actually sat on top of the two black trims, the brackets are facing in towards the bay so it's putting the brackets am hinges in further....if that makes sense...
If you like the brackets are bolted strait on to the bonnet so there matching the slope in the bonnet...
Re: Bonnet raiser help?
Posted: Mon Jun 17, 2013 2:22 am
by johnny
Harkus wrote:johnny wrote:Whats actuly catching is it the hinge itself or bolts on th lifter plate
The brackets it's self pal, they are actually sat on top of the two black trims, the brackets are facing in towards the bay so it's putting the brackets am hinges in further....if that makes sense...
If you like the brackets are bolted strait on to the bonnet so there matching the slope in the bonnet...
If it was me id cut the passenger side and rip the trim out of the drivers side as its only wires inside it so take the wires out tape em up with black tape, other than that your goin to have to bend the hinge which id advise against
Re: Bonnet raiser help?
Posted: Mon Jun 17, 2013 8:20 am
by Harkus
Considering they are meant to bolt strait on these have been a pain in the are
.
Re: Bonnet raiser help?
Posted: Mon Jun 17, 2013 12:04 pm
by johnny
Harkus wrote:Considering they are meant to bolt strait on these have been a pain in the are
.
Its a corsa you will get used to it
:lol:
Re: Bonnet raiser help?
Posted: Mon Jun 17, 2013 12:49 pm
by Harkus
johnny wrote:
Its a corsa you will get used to it
:lol:
Lol yeah I've been finding that out slowly haha