Page 1 of 1

dash clocks

Posted: Mon Dec 09, 2013 9:48 pm
by galligan3103
Could someone tel me in as much detail as possable. How to fit cirsa clocks with rev counter in to one that does not have it as standard. Cheers

Re: dash clocks

Posted: Mon Dec 09, 2013 9:52 pm
by andy w
What year is your car

Re: dash clocks

Posted: Mon Dec 09, 2013 9:55 pm
by andy w
Normally unscrew the cover around the steering wheel. Take them away. Then undo the three screws on the dash clock cover take it away will take alittle force. Once removed undo the 2 screws that holds the dash clocks in and remove the clocks. Hope this helps :D

Re: dash clocks

Posted: Mon Dec 09, 2013 9:55 pm
by galligan3103
1995 1.2 8v. Electric clocks. I have a set if clicks with rev conter when fitted the rev conter dont work but everythung else does. Was told summit about a wire from the ecu?

Re: dash clocks

Posted: Mon Dec 09, 2013 9:57 pm
by andy w
Think normally wired to alternator to get the rpm that way

Re: dash clocks

Posted: Mon Dec 09, 2013 10:24 pm
by johnny
Wire comes from gear box, it will be somewhere behind the dash, unfortunatly thats all i can say because where its siiting varys

Re: dash clocks

Posted: Mon Dec 09, 2013 10:25 pm
by andy w
Couldn't be sure on that one myself ain't done a cable one for years

Re: dash clocks

Posted: Mon Dec 09, 2013 10:27 pm
by andy w
Couldn't be sure on that one myself ain't done a cable one for years