Page 1 of 2
Help!
Posted: Thu Dec 12, 2013 3:48 pm
by Barraclough
How do I remove the top part of the steering column? Took the bottom off and tried to take the top off but won't fit. Can't take the indicators off cos it's in the way and broke one of the indicator clips trying to force the top out
Re: Help!
Posted: Thu Dec 12, 2013 3:52 pm
by johnny
The plastic cowling you mean? Or you taking out the actual colum
The plastic is what i think your talking about, if so its a lift and twist that gets it out, it will pull up past the wheel without breaking in my experience aswell, if its the colum well its alot of work to say the least
Re: Help!
Posted: Thu Dec 12, 2013 3:53 pm
by Barraclough
Just the plastic yeah, it won't wedge out :/
Re: Help!
Posted: Thu Dec 12, 2013 3:58 pm
by Barraclough
Done it lol. Should be fun putting back together
Re: Help!
Posted: Thu Dec 12, 2013 3:58 pm
by johnny
Push it back and lift straight up, it might feel like its going to snap but its never snaped on me anyway
Re: Help!
Posted: Thu Dec 12, 2013 4:04 pm
by andy w
How comes ya taking it apart ?
Re: Help!
Posted: Thu Dec 12, 2013 4:18 pm
by Barraclough
Re: Help!
Posted: Thu Dec 12, 2013 4:31 pm
by johnny
Got it off then:)
Re: Help!
Posted: Thu Dec 12, 2013 4:31 pm
by Barraclough
How do I replace now. I need to keep the stalks in right?
Re: Help!
Posted: Thu Dec 12, 2013 4:31 pm
by Barraclough
johnny wrote:Got it off then:)
Yeah
it's a pain!
Re: Help!
Posted: Thu Dec 12, 2013 4:34 pm
by johnny
Its harder to get it back on
Re: Help!
Posted: Thu Dec 12, 2013 4:36 pm
by johnny
The back part that goes under the speedo, push it in as far as you can get it then where the two screws go in push them in past the wheel and it will just push down then
Re: Help!
Posted: Thu Dec 12, 2013 4:37 pm
by Barraclough
I get get that but then the holes aren't big enough to put the stalks back in. If I try with then already in, will probly break them :/
Re: Help!
Posted: Thu Dec 12, 2013 4:40 pm
by andy w
Do u mean the rubber covers at the end
Re: Help!
Posted: Thu Dec 12, 2013 4:41 pm
by andy w
Ive got do mine soon broke one of the leds the other day so need order some for replacements