erratic idle problem.
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 1
- Joined: Sat Feb 15, 2014 12:41 pm
erratic idle problem.
hi all, have been doing some work for a mates mrs on her corsa b, x12xe, the idle was going from 1k to 3k every few seconds, plugged it in and it brought up maf sensor, idle control valve and closed throttle switch, checked these bits and found the maf was totally shot, got a new maf (bosch) put it on, cleared the codes but no difference, looked on autodata and it suggested the idle control valve, seeing a guide online about cleaning them and that it was a common issue I thought this was bound to resolve it, so stripped cleaned and refitted still no better, went and bought a new icv (bosch) and its better but still not right, its still hunting but now between 2-3k and slowly sorts itself out and will idle happily at about 1k. have been using opcom to read the live data etc and all seems ok apart from the egr valve is reading 1.8v, I hear anything over 1.3 v is too high. I am getting grief from this now, they are unwilling to pay anymore money as nothing seems to be fixing it, have goolged the problem and it seems quite common, with one person having spent 700 quid and still not sorted the issue out. when you rev the car it "holds" the revs slightly and fluctuates once or twice before settling sown again. have tried vacuum hoses, breather hoses, cant find any air leaks, just don't know what to try next. thought I would come on here and try to find out if anyone else has had this problem and sorted it out? cheers
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: erratic idle problem.
Block the egr, bit of sheet metal cut cut and drilled will be fine just make sure you leave the whole for coolant to pass through
Or buy this
http://pages.ebay.com/link/?nav=item.vi ... 0947851150
Or buy this
http://pages.ebay.com/link/?nav=item.vi ... 0947851150
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway