Hi All,
I have a corsa b 1998 S reg i have water in the drivers footwell any ideas where this may be coming from??
Many thanks
Sent from my iPhone using Tapatalk
Water leak
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 2
- Joined: Mon Mar 03, 2014 12:39 pm
- Location: Bedford, Bedfordshire, United Kingdom
- Contact:
Water leak
Using Tapatalk
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: Water leak
Hi buddy have ya checked all ya seals and rubbers in the bulk head at all
If it ain't green and black send it back
-
- CB-Uk Newbie
- Posts: 2
- Joined: Mon Mar 03, 2014 12:39 pm
- Location: Bedford, Bedfordshire, United Kingdom
- Contact:
Re: Water leak
Hi Andy,
I aint mate do u think thats the best place to start ?? Lol
Sent from my iPhone using Tapatalk
I aint mate do u think thats the best place to start ?? Lol
Sent from my iPhone using Tapatalk
Using Tapatalk
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: Water leak
Ye i would check ur bulk head see if all rubbers are in place and tip some water around ur door seal and window seal see if they are ok as well
If it ain't green and black send it back
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: Water leak
Sunroof seal aswell if it has one, and the gromit behind the fuseboard
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
Re: Water leak
Ye forgot that as the drain channels block from time to time
If it ain't green and black send it back
- coupe77
- CB-Uk User
- Posts: 597
- Joined: Tue Mar 11, 2014 3:52 pm
- Location: manchester
Re: Water leak
9 times out of 10 its the seal that fits between the bulk head and servo
there is a metal plate that the servo bolts to remove this plate its held
on by a few 13mm bolts all you need is tiger seal to reseal it
that should sort it
there is a metal plate that the servo bolts to remove this plate its held
on by a few 13mm bolts all you need is tiger seal to reseal it
that should sort it
https://www.facebook.com/pages/Jeacotts-motors/611022572351820