Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

was down the bodyshop today and now im wondering how i get a decent size cable into the front doors for the speakers?
im sure someone has done this, theres a \'boot\' with pins in it, if i move them around i might be able to drill a hole big enough maybe?
so what have other people done?
had another boot fitted and the doors drilled?
if photos are availible id appreciate it thanks!!! this photo sort iof shows the plug

[/img]

think i drilled mine with a 6mm drill bit, easy to do, i did mine with them still on the car

what you just drilled the door and fitted a grommit, simple as that yeah?

well my friend put holes in the bit of rubber pipe and ran it through that, but that was a quick and easy way to do it, and not a very good idea.

Depends if you want a proper job doing really lol.

[quote=\"voodoo_jellybaby2k2\"]well my friend put holes in the bit of rubber pipe and ran it through that[/quote]

arr sounds like there is enough room then maybe, id go for the quick option rather than the drilling as the doors been sprayed now

[quote=\"punkheadgray\"]what you just drilled the door and fitted a grommit, simple as that yeah? [/quote]

Thats what ive done!

Do it while you got the doors off its a pain in the arse with them on i tell you now

hmm, maybe i\'ll get the bodyshop to do it, i\'ll ask them when theyve done some more work, they have enough on there list at the mo

All i did was get the two connectors and drill a 8mm hole through both ends and feed the wires through and down behind the ECU and under the seats etc. I have 12Gauge speaker wiring with 4Gauge power/earth.4 wires go through the door because i have midrange and tweeters in there from my components.

I did do a proper job by the way



3 Layers of Aqua Seal Flashing tape & 1 Layer of Dynamat Extreme on the doors. And 2 layers of Aqua Seal Flashing Tape and 1 Layer of Brown Bread in the boot.

They are JL XR650 6.5\" Components powered by the 5Channel Alpine V12 amp.

seen as the doors are off drill a big hole in the multi plug

then when they are on run the cable throu

id forgotten all about this, your right adam, i\'ll get them drilled while the doors are off, the pins would need moving if i try and drill the multiplug,

i like the sound of having the door drilled with grommits fitted, i\'ll see what they say tomorrow