Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

Hi everyone,

The timing chain in the Z12xe engine was interrupted,
Although the compression ratio of 10.1:1
Valves Collided whit the pistons - And some valaes got twisted..

I started todismantle the head, I'll Upload Photos of the process,

Camshaft seem a bid rusty!|
Valve cover face looks burnt down oil sludge..


[FONT=Arial Black]Cylinder Head Opening[/FONT]







There is a dedicated device for catching the wave brackets
There is something the measurements of survivors locked the latch and allows him to move

Water crossings that appear really not good!







Defective valves
2 of exhaust
2 of the air inlet
Their different angles, they do not come back into place until the end of the entire movement.

I will be happy to know what is the role of the part?

I will be happy to know what is the role of the part?
Screws below were taken at high pressure..

There is someone ho can give me the measurements of the screw mounting that Locks the crank-shaft ?
Length ?

Screw appears at Number 2




Also the tool that reinforce the Camshaft.. (appears at no 1):

Should all be included in a locking kit from eBay or any autofactors

Blocking the EGR Valve,
is the EGR valve passages blocker Offered by eBay Appropriate ?
its Leaves one open passage.. For the Cooling Fluid
has Someone tried it ?





It is important to block the air duct enters the valve?