Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

wondering what one to get?
was thinking janspeed or similar

opinions ?

ive lost track of what engine youve got now matey? is it still the red 1.2, was you putting agsi in?

yes this is for my c16xe
i have my inlet system sorted i think now
need a good exhaust manifold and decat

iv got a C16Xe mate but i couldn\'t find anyone who has manifolds for this engine apart from a standard vauxhall one.

i know soeone who has a janspeed one im sure sbd will know of a few aswell

i tried janspeed and sbd but janspeed said they only did an X16XE and SBD didnt have any.

I think they must have stopped making them for this engine now. Im desperate for one ASAP but had no luck what so ever.

Friend of mine fitted a janspeed manifold for a X16XE 2 his C16XE GSi, used exhaust gum to seal any gaps, also has a magnex decat aswell

Adam try pro tec they should know someone also not sure of a contact number but Tony Law is supposed to be a good tube manifold and exhaust man will try find a blue book and seeif there is a listing!

sbd will have one, the love the c16xe engine! also supersprint list one for the c16xe engine

Janspeed does the job cheap, yo\'re only after something better than the std cast job. The one for the X16XE is the same fit, just needs the Secondary air pump bit plugging, easy to do.

If you want a nice piece of kit ger ashley to make you a full manifold and system, you\'ll be lookign in the order of £300 for the full job, pm me if you\'re after the number of them

hmm im told stainless wil crack
with engine movnment

i want manifold and de-cat

stainless wont crack.... mine hasnt and its done 60,000miles in 2 years of everyday use and abuse!

[quote=\"broster\"]sbd will have one, the love the c16xe engine! also supersprint list one for the c16xe engine[/quote]

sbd dont have one and when i foned courtney they said they could only get an X16XE from Supersprint

and also the X16Xe and C16XE manifolds are very different as the X16 is longer and has a larger bend in it.

EX-M-COR-COMP
EX-M-RD3
EX-M-WLR2
EX-M-WLR4
EX-M-CR-16V

those are the part numbers ofr the 1.6 manifolds, give them a call and ask which is which!

hhmmmmm i know for a fact the c16 and x16 are different in there routing but after the cat they are the same

so i spose if i got a x16 decat and manifold, blanked the egr bit off surly itd be fine?

id need to see the teo together to see any difference in them