Page 1 of 1

16" Monza Alloys

Posted: Sun Aug 07, 2005 7:41 pm
by phillygee
Hi,
Ok first time on here but seems wicked so far.
Heres a question i have spend months trying to find the answer.
I have taken my car to my own mechanic and kwik fix and neither have managed to help......
I put some 16\" alloys on my car about 3 months ago and if i have people in the back seat and go over a bump, the outside of the wheel rubs agains the plastic wheel arch......... BUT it is only on the passenger side

ANY ideas how i can sort this out before my wheels burst

Phillygee

16" Monza Alloys

Posted: Tue Aug 09, 2005 6:55 pm
by Dodgy Dave
up grade your suspension, and trim the wheel archs back this should help it stop

16" Monza Alloys

Posted: Mon Aug 15, 2005 6:25 pm
by phillygee
any idea what the problem might be though?

16" Monza Alloys

Posted: Tue Aug 16, 2005 12:56 pm
by Dodgy Dave
yea when you go over bumps or have people in the back the wheels rub against the archs

16" Monza Alloys

Posted: Tue Aug 16, 2005 2:05 pm
by Joff
Or the wheels are the wrong offset. Check behind the centre cap (if any) or around the inside of the rim. Look for a number starting with \"ET\" or something like 38, 42 or 45.

16" Monza Alloys

Posted: Tue Aug 16, 2005 2:07 pm
by phillygee
cool, just had a look and the number on the tyre is 195/45 R 16

Does this help at all?

Phil

16" Monza Alloys

Posted: Tue Aug 16, 2005 4:12 pm
by kawika
it just means your suspension is a bit more knackered on that one side., wouldn\'t worry 2 much, i don\'t bother carrying rear passengers, to much hassel.

Rubbing tyre walls

Posted: Tue Aug 16, 2005 8:23 pm
by mark-sport
I;ve lowered mine 60mm on 15\'s and have had my archs rolled but have found that it catches slightly on the rear drivers side arch. Got the wheel off and had a good look...Found out it was the bolt that holds the arch trims on. I grinded it back to nut without taking too much off, Now i can load it up with 5 people and dont have to worry about avoiding bumps.Give that one a try sunshine :whistle:

16" Monza Alloys

Posted: Wed Aug 24, 2005 1:56 pm
by phillygee
hmmmmm
sounds like a plan

did you do the arches yourself??