Corsa-B.uk - Vauxhall, Opel and Holden Corsa B Owners Club

hi everyone

i just fitted some new Lexus lights to my car.

i got a problem which is driving me mad. one side all the bulbs work fine, the other side most bulbs work but wen it comes to the bulb at the top. the brake/tail light bulb its not working 100%

when my lights are on the drivers side works fine but the passenger side wont. when i brake though they both come on.

Ive checked all the bulbs and even swapped the bulbs over to check but its being stupid. anyone have this problem? please help

check your fuses mate, i had the same problem with mine, ended up been a blown fuse after i dismantled all light cluster! hope this helps

failing that check the bulb, one of the fimilments might have gone,

cheers mate did the same thing happen to you then? your brakes worked but tail light didn\'t work? so ill look at fuses tomorrow and hopefully its blown,

ye i thought it was something wrong with the cluster itself but ended up been a 5 amp fuse which had blown! good luck!

Check you\'re using the correct bulbs (twin filament if needed on some looms) and that all bulbs are fitted snugly.

Check the wiring on the looms to make sure no wires have come loose from the bulb holders.

Failing that, it\'s likely the loom is wired incorrectly. Speak to wherever you bought them from as it\'s a known problem with the imported lights (Ultra\'s used to be the same but I think they\'ve had a load re-wired now).

cud b a fuse
cud b an eliment in the double eliment bulb so check that

and if all elses fails take them back and say there O_o!!

yeh thanks for the help guys it was the blody fuse, should of checked it before,thanks for help