who have driven a 20xe corsa, whats the handling like, honestly.
compared to a gsi c16xe/x16xe
wanted opinions from ppl
- Adam-D
- Administrator
- Posts: 1398
- Joined: Mon Nov 08, 2004 11:03 pm
- Location: cheshire
- Contact:
-
- CB-Uk User
- Posts: 277
- Joined: Mon May 02, 2005 9:56 pm
- Location: Hemel Hempstead
wanted opinions from ppl
Not the same,
20XE\'s still handle ok, but are laking feeling and precision in the steering, the brake dive is interesting, and the cornering stablity is definatley compramised.
the 16xe in comparision, is sharper on turn in, and has better cornering stablity, you can also get away with brakign while turnign in without upseting the car too much, the 20XE in comparision twiches much more.
If I was motorway driving the 20XE cause it\'s effortless, for B-roads and track the small block wins. can\'t have best of both, or can you X18XE1
20XE\'s still handle ok, but are laking feeling and precision in the steering, the brake dive is interesting, and the cornering stablity is definatley compramised.
the 16xe in comparision, is sharper on turn in, and has better cornering stablity, you can also get away with brakign while turnign in without upseting the car too much, the 20XE in comparision twiches much more.
If I was motorway driving the 20XE cause it\'s effortless, for B-roads and track the small block wins. can\'t have best of both, or can you X18XE1
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
wanted opinions from ppl
I found mine (PAS) from 16XE to 20XE to be pretty much unnoticeable.
Bilstein shocks and springs before, FK coilovers after.
Mine\'s also had strengthening plates on the bodywork bar, Powerflex bushes (altho the tie-bar bushes popped out) and still have the front anti roll bar.
I certainly don\'t suffer from any worse brake dive than when I had the 16XE, and mine does like to anchor at the front.
On a track I wouldn\'t bet on the 20XE, but then I don\'t track mine so...
Bilstein shocks and springs before, FK coilovers after.
Mine\'s also had strengthening plates on the bodywork bar, Powerflex bushes (altho the tie-bar bushes popped out) and still have the front anti roll bar.
I certainly don\'t suffer from any worse brake dive than when I had the 16XE, and mine does like to anchor at the front.
On a track I wouldn\'t bet on the 20XE, but then I don\'t track mine so...
No more Corsa :(
- Adam-D
- Administrator
- Posts: 1398
- Joined: Mon Nov 08, 2004 11:03 pm
- Location: cheshire
- Contact:
wanted opinions from ppl
strenghtening plates?
where from?
where from?
-
- CB-Uk User
- Posts: 1367
- Joined: Fri Jun 10, 2005 7:29 pm
- Location: Peterborough
wanted opinions from ppl
Mine were from MTech, but try J100RSA on Mig and other sites.
No more Corsa :(
-
- CB-Uk User
- Posts: 179
- Joined: Thu Jul 07, 2005 1:17 pm
- Location: kidderminster
wanted opinions from ppl
I thought they handled ok, couldnt really tell the difference from my 1.4 16v sport.
- Adam-D
- Administrator
- Posts: 1398
- Joined: Mon Nov 08, 2004 11:03 pm
- Location: cheshire
- Contact:
wanted opinions from ppl
good stuff
these plates they just metal plates that you weld on?
these plates they just metal plates that you weld on?
-
- CB-Uk User
- Posts: 1684
- Joined: Thu Feb 24, 2005 8:23 pm
- Location: Essex
wanted opinions from ppl
joff did powerflex bushs make a huge difference? i hear they do. been meaning to get some fitted myself.
did you fit them same time the 2.0l went in?
did you fit them same time the 2.0l went in?