suspension query

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
voodoo_jellybaby2k2
CB-Uk User
Posts: 216
Joined: Wed Jun 01, 2005 11:46 pm
Location: Darlington

suspension query

Post by voodoo_jellybaby2k2 »

Right, if i purchase a suspension package that comes with uprated shocks and some -40mm springs, can i change the springs and put -60mm ones on instead.....???

It says in the advert that the front can be lowered either 40mm or 60mm, and the back is fixed at 40mm..... just curious if i can change the back springs to make it 60mm all round....???

I have not got a clue about this, :lol: im stupid i know :D
mr.feza
CB-Uk User
Posts: 276
Joined: Wed Aug 24, 2005 7:35 pm
Location: Northampton

suspension query

Post by mr.feza »

i really have no clue either, but i imagine you could have 60mm all round as it is possible to put 60mm springs on standard shocks alone. So just a guess but i imagine putting them on the uprated shocks would be fine? :roll:
Joff
CB-Uk User
Posts: 1367
Joined: Fri Jun 10, 2005 7:29 pm
Location: Peterborough

suspension query

Post by Joff »

Yes, the general rule is you can swap over springs.
Some shock absorbers are uprated and shortened to match the spring, but I don\'t think anyone does these for the Corsa any more.
No more Corsa :(
j1400
CB-Uk User
Posts: 277
Joined: Mon May 02, 2005 9:56 pm
Location: Hemel Hempstead

suspension query

Post by j1400 »

You can do that no problem, but using -60mm springs on std shocks is asking for touble.
mr.feza
CB-Uk User
Posts: 276
Joined: Wed Aug 24, 2005 7:35 pm
Location: Northampton

suspension query

Post by mr.feza »

i think my mate had 60mm drop on his standard punto about 4 years ago. And it was terrible - bottomed out and hurt ya\'ass real bad!
voodoo_jellybaby2k2
CB-Uk User
Posts: 216
Joined: Wed Jun 01, 2005 11:46 pm
Location: Darlington

suspension query

Post by voodoo_jellybaby2k2 »

So, using -60mm springs on std shocks is a no no...... but if get these uprated shocks then i can put new -60mm springs on them, even though they only came with -40mm ones....???

There GAS shocks i think, but then the advert says something about FK as well...... and doesnt tell you the make of the springs......
bockfinkle
CB-Uk Newbie
Posts: 31
Joined: Fri Sep 23, 2005 12:28 am
Location: merseyside

suspension query

Post by bockfinkle »

why not just get a set of gmax, which come at 60mm alround anyway. thats what im running on and its a good setup, bit bumper....but whta do you expect.
trev150
CB-Uk User
Posts: 197
Joined: Sat Sep 17, 2005 8:18 pm

suspension query

Post by trev150 »

Most -60mm kits will come with shortened shocks to stop it bottoming out.
The ride comfort will terrible with low springs and standard shocks.
bockfinkle
CB-Uk Newbie
Posts: 31
Joined: Fri Sep 23, 2005 12:28 am
Location: merseyside

suspension query

Post by bockfinkle »

that gmax kit im on is springs and shocks
voodoo_jellybaby2k2
CB-Uk User
Posts: 216
Joined: Wed Jun 01, 2005 11:46 pm
Location: Darlington

suspension query

Post by voodoo_jellybaby2k2 »

Ive heard lots of bad things about G-max suspension and been told to go for FK, AVO to name but a few
bockfinkle
CB-Uk Newbie
Posts: 31
Joined: Fri Sep 23, 2005 12:28 am
Location: merseyside

suspension query

Post by bockfinkle »

dont know. but mine is fine. took a fair bit of punishment (dodgy road surfaces and driving it hard) and they have been fine.
trev150
CB-Uk User
Posts: 197
Joined: Sat Sep 17, 2005 8:18 pm

suspension query

Post by trev150 »

IMO AVO are ace!!
Post Reply