snapped clutch cable

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
tel_boy
CB-Uk Newbie
Posts: 27
Joined: Tue Aug 21, 2007 12:09 pm
Location: Falkirk, Scotland

snapped clutch cable

Post by tel_boy »

hello guys and gals, yes its me again with yet another problem. my clutch cable snapped 4 months ago so i changed it, it snapped after 4 months and now ive got a new one on. it snaps at the foot pedal. why is this? my boss used to be a mechanic and his sypnosis is that the clutch or clutch casing is seizing up. i dont know wot to do, i cant keep taking it to the garage its too expensive. any help would be great thanx. :)
richardhhha
CB-Uk User
Posts: 281
Joined: Sun Jul 15, 2007 9:32 pm
Location: Wallington

Re: snapped clutch cable

Post by richardhhha »

sounds like your boss is on the right track, if its snapping at the pedal ether something is catching it and wearing the cable thin or its being over stressed due to something being corroded.
X14XE Janspeed S/S center and rear with 3.5" round with hoffman 200 cpi sport cat
C20XE GSi custom 3 box exhaust system, and GAZ 60mm drop
ryan2910
CB-Uk Newbie
Posts: 14
Joined: Thu Oct 23, 2008 12:02 pm
Location: Manchester

Re: snapped clutch cable

Post by ryan2910 »

I have the same problem i have only had my car for about 8 months and i have been through 3 clutch cables. What should we do about it?
MattyB
CB-Uk User
Posts: 668
Joined: Thu Aug 16, 2007 12:05 pm
Location: West Midlands

Re: snapped clutch cable

Post by MattyB »

Try what i did.

I had my cable snap, aa or whoever came out and put a temporary one on. About 6 months later this one then snapped (on my way to uni right in the middle of Birmingham!!) then my next one snapped about 4months later while down in Bristol seeing my girlsfriends older family members (ended up having to stay an extra night to have fixed (as this was a sunday)).

I was then told that the actual clutch pedal looked like it had worn causing an uneven groove in it. The plastic bit at the top had worn away at the top like they suggested. I got another pedal from the scrap yard and spent an afternoon fixing it about a year to a year and a half ago. (Touch wood and cross fingers :D it hasn't happened since).

That could be the problem.

Hope this helps
Post Reply