Noisy Tappets 1.2 8v

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
fish6634
CB-Uk Newbie
Posts: 2
Joined: Mon Dec 17, 2007 11:52 am

Noisy Tappets 1.2 8v

Post by fish6634 »

Hi first of all i am new to the club so any help will be greatly appreciated. This is my first corsa, i picked it up on friday and the fisrt thing i noticed is how tappety the engine was. The first thing i did was replaced the oil with semi synthetic 10w 40 and replaced the oil filter. I was hoping from experience with other cars (non vauxhall) that this would cure the problem. It hasn't, from cold the engine is quite noisy but it only sounds as though its one tappet. Once warmed up it does quiet down but you can still hear it tapping from inside the car. The noise is mainly between 2000rpm and 3500rpm. Cruising at 65mph on the motorway seems to settle it down and the tapping can't be heard. I know the obvious answer is to whip the lifters out and leave them in a bucket of petrol over night but i believe its quite a job requiring special tools. Any suggestions of sorting this out without taking the lifter out? I heard you can get some sort of Hydraulic tappet treatment from halfords? Anyone tried it? One thing i will say is that the oil that was in it was really manky, well past its best i just hope it hasn't done damage! Any help would be greatly appreciated

THANKS in advanced!!
fish6634
CB-Uk Newbie
Posts: 2
Joined: Mon Dec 17, 2007 11:52 am

Re: Noisy Tappets 1.2 8v

Post by fish6634 »

no help??
User avatar
Octane2097
Senior Moderator
Posts: 2125
Joined: Sun Jun 25, 2006 9:25 pm
Location: Barnsley, South Yorkshire

Re: Noisy Tappets 1.2 8v

Post by Octane2097 »

sorry pal have no idea :S
Peugeot 207 Sport 1.6 VTI (120)
Gary_billingham
CB-Uk Newbie
Posts: 12
Joined: Tue Feb 05, 2008 12:36 pm
Location: Billingham

Re: Noisy Tappets 1.2 8v

Post by Gary_billingham »

i have the same problem,as soon as the temp gauge reachs the 1st white bar it practicly goes but still heard outside,i am still looking into it,if i find anything out will post back
matt1.2
CB-Uk User
Posts: 231
Joined: Sun Oct 23, 2005 6:20 pm

Re: Noisy Tappets 1.2 8v

Post by matt1.2 »

May help but grab a haynes book and cheak the tappet gaps.
Post Reply