Page 1 of 2
Fitting from speakers
Posted: Sat Apr 02, 2005 12:35 am
by coollg
Hi
I am thinking about replacing my stock front speakers
is this hard to do and also i noticed in the hains manual that there are only 3 mouting holes
would this cause a problem
also woudl these speaker fit ok inside the current speaker slots with out any modfiecations
http://caraudiosecurity.com/catalog/pro ... cts_id+505
Regards lee
Fitting from speakers
Posted: Sat Apr 02, 2005 9:40 am
by Poundie
Peice of piss, done it dis weekend!
Go halfords, get your 13cm or 16cm speakers, also get a spacer n fitting set for £14.99, autolead makes them, in the kit you get the adapter for the original block dats on the wiring to be able to put 2 spade connecters on!
Its simple, buy your speakers, get the AUTOLEAD fitting and adapter kit, take the old speakers out, put the new stuff!
Fitting from speakers
Posted: Sat Apr 02, 2005 11:20 am
by coollg
kl have to got any pics at all
Fitting from speakers
Posted: Sat Apr 02, 2005 8:49 pm
by kawika
was also thinkin bout this would it be worth replaceing tweeter at same time or not?
Fitting from speakers
Posted: Sun Apr 03, 2005 8:44 am
by Poundie
Componants is what im getting next! So if ye look down your local halfords n have a butchers in the catolgue itll show u the componants section, with speakers and tweeters as a package!
Fitting from speakers
Posted: Sun Apr 03, 2005 10:42 am
by kawika
but wil i notice any real diffrence and are tweeters a pian to wire from standard, cause most comp sets have seperate crossover
Fitting from speakers
Posted: Sun Apr 03, 2005 5:56 pm
by coollg
yea i think you woudl notice a difference i build some spker box with driver n sutff for ma a level project and it does add sometihng to the music makes it sound betta bascually more sharp n clear
Fitting from speakers
Posted: Mon Apr 04, 2005 9:13 am
by lee_corsa
first thing i did was throw away the crap standard tweeters and replaced with alpine ones alot clearer
Fitting from speakers
Posted: Mon Apr 04, 2005 9:14 am
by amanda
i just fitted some pioneer 13cm components the other weekend there really good
Fitting from speakers
Posted: Mon Apr 04, 2005 5:30 pm
by coollg
just wiondering but u know the normal 2 way speaker with the tweeter in the center do they have 2 sets of connecter on the back / also do they have a crossover built in
Fitting from speakers
Posted: Mon Apr 04, 2005 5:33 pm
by lee_corsa
built in crossover just cut wired for tweeter and join to spade connections using crimps or blocks
Fitting from speakers
Posted: Mon Apr 04, 2005 5:37 pm
by coollg
o rite
so realy i coudl remove or maybe just leave the old tweeter disconnected woudl that be ok
Fitting from speakers
Posted: Mon Apr 04, 2005 5:38 pm
by lee_corsa
yep
Fitting from speakers
Posted: Mon Apr 04, 2005 5:40 pm
by coollg
gdgd
thnx for the quicm reply
Fitting from speakers
Posted: Mon Apr 04, 2005 5:41 pm
by lee_corsa
no probs bud