Page 1 of 1
1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 12:32 am
by matt_gsi_rep
hi, would a 1.6 8v out a astra fit into a 1.2 8v corsa? would i need anything other than the engine, electrics, ecu, gear box, drive shafts? and would a 1.4 16v go in just as easy or easyer?thanks for any help
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 1:47 pm
by Octane2097
you can make any engine fit really if your willing!
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 2:33 pm
by matt_gsi_rep
which is the best performance 1.6 8v? or 1.4 16v ecu chipped? thanks
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 2:52 pm
by Octane2097
probably the 8v
how much power does the 1.6 8v put out
i know the 1.4 16v is 90bhp
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 3:11 pm
by matt_gsi_rep
the 1.6 8v i think is around 100bhp but thats standard the 1.4 16v iv been offered has had a 3 way clutch put in the ecu chipped. thinking this will be the best out of the 2 i have 1.4 16v brakes too. which would impress me the most 1.4 16v or 1.6 8v? iv been contenplating which to choose for a while i have been offered them both at the same price.
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 6:47 pm
by Octane2097
probably the 1.4 16v then they wer alot more revvy than the 8valve engines
plus if its been chipped probably give a bit more poke
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sat Jun 21, 2008 7:56 pm
by smoothsebsta
16v engines need different mounts and ecu and loom etc, 90% of 8v engines can fit into other 8v motors. would stick with 8v, less can go wrong lol
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Sun Jun 22, 2008 12:26 pm
by matt1.2
I would think the 8v should be a much easier fit. The only problem you may find is drive shafts, weather your corsa ones would have the right inner cv joints for the gear box.
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Mon Jun 23, 2008 1:40 pm
by matt_gsi_rep
i have the gear box and drive shafts from the engine?would 1.4 16v be easy because it has the mounts with it?
Re: 1.6 8v engine into a 1.2 8v shell????
Posted: Tue Jun 24, 2008 12:29 am
by Octane2097
if u gettin the engine from a scrap car then might aswell take all the mounts the gearbox and any ancilarays already connected to it
if u have the mounts then the 16ver should go straight in after all the engine bay in the 8v is same as the 16v
but yea as mat1.2 said it would be easier to swap for an 8v and id double check the innet CV joints