how low
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 1
- Joined: Fri Jul 11, 2008 8:32 pm
- Location: Chelmsford, Essex
- Contact:
Re: how low
i have my corsa lowered 60mm on springs and dampers all round. iam running normal 165/70R13 steel wheels on front and same on the rear except they have been "rim reversed" (this means my standered rims have been taken, had the centers cut out then span round and welded back together. This makes the rim look an extra 2" wider than the front when actually they are the same size ) the archs sat on the rear tyres so i pulled the rear arches off and used mole grips to do a touch of home arch widening then glued the arches back on to hide the dirty work. now they are perfect. only other problem i have had is the arch screws cutting into the front tyres. here i removed the arch screws that were rubbing then added some silicone in place and secured with tape till the silicone was dry. looks and handles the nuts now. alot of work just for the sake of lowering though.
-
- General Moderator
- Posts: 612
- Joined: Fri Aug 17, 2007 1:46 pm
- Location: glasgow