Page 1 of 1
Help
Posted: Thu Jul 31, 2008 8:16 am
by dancotton2003
i really need t new cylnder head for my 1.4 corsa sport 16 valve but ideally i would like a polished and ported head
but i dont acctually know were to get one from can any one help
i would really appriciate it
thanks
Re: Help
Posted: Thu Jul 31, 2008 10:17 pm
by nom811
hey mate. look in total vauxhall there is loads of good places taht will get you a polished n ported head etc. or just look about for a second hand one theres also 2nd hand breakers in the back off total vauxhall. hope this helps thanks nicky
Re: Help
Posted: Thu Jul 31, 2008 10:44 pm
by dancotton2003
Hi
Yes thanks but
im dense and i dnt know what model my engine is any ideas???
just a corsa 1.4 16 valve
cheers
Re: Help
Posted: Thu Jul 31, 2008 10:46 pm
by Chrex
x14xe
Re: Help
Posted: Thu Jul 31, 2008 10:48 pm
by dancotton2003
chrex wrote:x14xe
YOU = LEGEND
Re: Help
Posted: Thu Jul 31, 2008 10:58 pm
by dancotton2003
OOOPPSS
just spent 500 on the performace center website
lots of things
FSE - Power Boost Valves for Vauxhall
KBV13270HI Piper - Camshaft Kits for Vauxhall
DPC8006 Black Diamond - Clutches for Vauxhall
its all good
Re: Help
Posted: Fri Aug 01, 2008 12:00 am
by Chrex
lmao...yes yes it is! all good. Well you will notice a difference.
I have an inlet manifold here for £20 delivered off an x16. You will see gains from it, especially above 4k. X14 one runs outta steam, but this just kept pulling the engine to 6k. Bigger bores mean theres more air, so if you're interested gimme a PM. Is sprayed in High temp black paint, looks the danglies on the engine...and is cheaper than a £250 diblas/lexmaul!
I had it on my x14 btw and noticed a difference once it was off...am putting my other x16 inlet on for a month because i want the increase back!