Brocade 2.0 16v

For New & Continuing Projects Only.
NOT for past projects or questions.
Post Reply
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Brocade 2.0 16v

Post by c16se corsa »

Coil pack earthed out?
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

ummm yeah i earthed it once before, on my old crank sensor! didnt work so didnt think it needed earthing, think ill try again now on my new sensor
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

done other bits on engine instead of wasting too much time on getting spark, firstly wrapped my manifold
Image
then put covers on engine, and fitted power steering and all the belts
Image
Image
next tried on manifold, also put in driveshafts, arb all that stuff and dropped back on ground!!
Image
Image
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
miles123
CB-Uk User
Posts: 154
Joined: Fri May 20, 2011 12:56 pm
Location: West London

Re: Brocade 2.0 16v

Post by miles123 »

looking really good mate. hope you get the spark sorted out :D
Corsa 1.0 GSi Rep :)
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: Brocade 2.0 16v

Post by PRICER »

Looks smart dude :) proper smart!!
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
rsi-dan
CB-Uk User
Posts: 1323
Joined: Mon Dec 20, 2010 1:06 am
Location: Crewe

Re: Brocade 2.0 16v

Post by rsi-dan »

looking super smart that
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

cheers guys, sorted wiring now and getting spark :D only need to stop rail leaking then be good to fire up. also these arrived today....
Image
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: Brocade 2.0 16v

Post by PRICER »

Nice one mate, what was up with it in the end?
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

not sure tbh, i had a check through loom at all connection, but they seemed fine except fact loom has been cut and joined everywhere lol, then checked crank sensor again and there was no bolt, i membered cause it was thicker than my old sensor i had to find another longer bolt but cba at the time on weds, so yesterday found a bolt to fit it and tightend it and it went in abit more into block so that could have been then problem in the end :meh:
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

well, she's up and running well! put some water in yesterday and let tickover for a good while and seems in good order! had retighten headbolts oncemore but now can start tidying thing up in the bay and then just few other jobs and then will book her in for exhaust :) will get some pics later on....
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
nath2905
General Moderator
Posts: 1869
Joined: Mon Jan 25, 2010 7:03 pm
Location: Stoke On Trent

Re: Brocade 2.0 16v

Post by nath2905 »

glad to hear it mate :)
The Future's Bright, The Future's Orange!

B/B Bonnet Guide ..
http://forums.corsa-b.co.uk/viewtopic.php?f=106&t=17679

Holidays Are Coming....
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

got couple of pics as promised, but also some bad news, for some reason ive got no spark again. tried everything again, but no luck, can only think its wiring as been messing with it today tidying things up abit! tbh the loom has loads cuts and joins so seen better days. would buy a new loom if i could find one :(
Image
Image
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
User avatar
c16se corsa
CB-Uk User
Posts: 271
Joined: Thu Jan 27, 2011 3:29 pm
Location: Pontefract

Re: Brocade 2.0 16v

Post by c16se corsa »

I've got a loom and ecu mate but it's for the later type wi coil pack but but av got a coil pack aswell
If its not bodged then its not "propper"

Bike carb project
http://forums.corsa-b.co.uk/viewtopic.php?f=81&t=19528
User avatar
PRICER
CB-Uk User
Posts: 3510
Joined: Sun May 10, 2009 9:21 pm
Location: ludlow shropshire

Re: Brocade 2.0 16v

Post by PRICER »

i would say you could buy mine, but then that would mean converting to electric ignition, hope you get it sorted tho dude, :) you drove it forwards and backwards yet?
TURBO LAG IS JUST FOREPLAY ;)

2.0 16v GSI SPORT TWIN WEBER 45'S AND KENT CAMS :]
User avatar
Jamie1991
CB-Uk User
Posts: 825
Joined: Mon Jul 11, 2011 9:40 am
Location: Walsall

Re: Brocade 2.0 16v

Post by Jamie1991 »

id did yesterday abit when it was running, only a metre back and forward thou! my loom is cut everywhere thou i think, like connecter that goes into coil has been cut up and its 4pin plug but only 3 wires as one has been cut, and wire that go into ecu have all been cut as well, mainly earths there. as far as im aware you only need to wire in plug to fit into corsa dash loom and switched live? if so why got cuts everywhere :(
My Project : Brocade 2.0 16v
....
Cant wait for Summer!
Post Reply