So some people use floss? some people use a credit card?
also people say if you heat up the glue the badge leaves it peal off but some people say you need a chemical to remove it
SOMEONE HELP!
How to de-Badge porperly?
Moderator: Octane2097
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: How to de-Badge porperly?
Heat it up first as when the glue is warm the more will come off
I use a Stanley blade to pry it off but this can damage the paint so most use a bit of cord
When the badge is off heat the glue again and use either detar or some hot soapy water to loosen it up, then just slide a credit card across it and keep putting more detar on it until it's all off
I use a Stanley blade to pry it off but this can damage the paint so most use a bit of cord
When the badge is off heat the glue again and use either detar or some hot soapy water to loosen it up, then just slide a credit card across it and keep putting more detar on it until it's all off
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- Aknight_811
- CB-Uk User
- Posts: 214
- Joined: Wed Jul 31, 2013 7:37 pm
- Contact:
Re: How to de-Badge porperly?
Take a look at my 1.2 silver moredoor log im putting up a small guide as I think I found quite a good way to get it done without needed toffee wheels or too much effort
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk